From: Dave Chinner <david@fromorbit.com>
To: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Cc: Chandan Babu R <chandan.babu@oracle.com>,
"Darrick J. Wong" <djwong@kernel.org>,
Dave Chinner <dchinner@redhat.com>,
Allison Henderson <allison.henderson@oracle.com>,
Zhang Tianci <zhangtianci.1997@bytedance.com>,
Brian Foster <bfoster@redhat.com>, Ben Myers <bpm@sgi.com>,
linux-xfs@vger.kernel.org, linux-kernel@vger.kernel.org,
xieyongji@bytedance.com, me@jcix.top
Subject: Re: [PATCH v2 2/2] xfs: update dir3 leaf block metadata after swap
Date: Wed, 29 Nov 2023 19:59:56 +1100 [thread overview]
Message-ID: <ZWb9jMQSjbqqzrob@dread.disaster.area> (raw)
In-Reply-To: <20231129075832.73600-3-zhangjiachen.jaycee@bytedance.com>
On Wed, Nov 29, 2023 at 03:58:32PM +0800, Jiachen Zhang wrote:
> From: Zhang Tianci <zhangtianci.1997@bytedance.com>
>
> xfs_da3_swap_lastblock() copy the last block content to the dead block,
> but do not update the metadata in it. We need update some metadata
> for some kinds of type block, such as dir3 leafn block records its
> blkno, we shall update it to the dead block blkno. Otherwise,
> before write the xfs_buf to disk, the verify_write() will fail in
> blk_hdr->blkno != xfs_buf->b_bn, then xfs will be shutdown.
>
> We will get this warning:
>
> XFS (dm-0): Metadata corruption detected at xfs_dir3_leaf_verify+0xa8/0xe0 [xfs], xfs_dir3_leafn block 0x178
> XFS (dm-0): Unmount and run xfs_repair
> XFS (dm-0): First 128 bytes of corrupted metadata buffer:
> 00000000e80f1917: 00 80 00 0b 00 80 00 07 3d ff 00 00 00 00 00 00 ........=.......
> 000000009604c005: 00 00 00 00 00 00 01 a0 00 00 00 00 00 00 00 00 ................
> 000000006b6fb2bf: e4 44 e3 97 b5 64 44 41 8b 84 60 0e 50 43 d9 bf .D...dDA..`.PC..
> 00000000678978a2: 00 00 00 00 00 00 00 83 01 73 00 93 00 00 00 00 .........s......
> 00000000b28b247c: 99 29 1d 38 00 00 00 00 99 29 1d 40 00 00 00 00 .).8.....).@....
> 000000002b2a662c: 99 29 1d 48 00 00 00 00 99 49 11 00 00 00 00 00 .).H.....I......
> 00000000ea2ffbb8: 99 49 11 08 00 00 45 25 99 49 11 10 00 00 48 fe .I....E%.I....H.
> 0000000069e86440: 99 49 11 18 00 00 4c 6b 99 49 11 20 00 00 4d 97 .I....Lk.I. ..M.
> XFS (dm-0): xfs_do_force_shutdown(0x8) called from line 1423 of file fs/xfs/xfs_buf.c. Return address = 00000000c0ff63c1
> XFS (dm-0): Corruption of in-memory data detected. Shutting down filesystem
> XFS (dm-0): Please umount the filesystem and rectify the problem(s)
>
> From the log above, we know xfs_buf->b_no is 0x178, but the block's hdr record
> its blkno is 0x1a0.
>
> Fixes: 24df33b45ecf ("xfs: add CRC checking to dir2 leaf blocks")
> Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
> Suggested-by: Dave Chinner <david@fromorbit.com>
> ---
> fs/xfs/libxfs/xfs_da_btree.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/fs/xfs/libxfs/xfs_da_btree.c b/fs/xfs/libxfs/xfs_da_btree.c
> index e576560b46e9..d11e6286e466 100644
> --- a/fs/xfs/libxfs/xfs_da_btree.c
> +++ b/fs/xfs/libxfs/xfs_da_btree.c
> @@ -2318,8 +2318,17 @@ xfs_da3_swap_lastblock(
> * Copy the last block into the dead buffer and log it.
> */
> memcpy(dead_buf->b_addr, last_buf->b_addr, args->geo->blksize);
> - xfs_trans_log_buf(tp, dead_buf, 0, args->geo->blksize - 1);
> dead_info = dead_buf->b_addr;
> + /*
> + * If xfs enable crc, the node/leaf block records its blkno, we
> + * must update it.
> + */
I'd combine this comment into the comment 3 lines above.
> + if (xfs_has_crc(mp)) {
> + struct xfs_da3_blkinfo *da3 = container_of(dead_info, struct xfs_da3_blkinfo, hdr);
Line length too long.
And using container_of() is rather unique an unusual, and not done
anywhere else in the code. dead_buf->b_addr is a void pointer,
so no cast is necessary:
struct xfs_da3_blkinfo *da3 = dead_buf->b_addr;
> +
> + da3->blkno = cpu_to_be64(xfs_buf_daddr(dead_buf));
> + }
> + xfs_trans_log_buf(tp, dead_buf, 0, args->geo->blksize - 1);
> /*
> * Get values from the moved block.
> */
And whitespace for readability before the next code block. IOWs:
/*
* Copy the last block into the dead buffer, update the block info
* header and log it.
*/
memcpy(dead_buf->b_addr, last_buf->b_addr, args->geo->blksize);
if (xfs_has_crc(mp)) {
struct xfs_da3_blkinfo *da3 = dead_buf->b_addr
da3->blkno = cpu_to_be64(xfs_buf_daddr(dead_buf));
}
xfs_trans_log_buf(tp, dead_buf, 0, args->geo->blksize - 1);
dead_info = dead_buf->b_addr;
/*
* Get values from the moved block.
*/
Cheers,
Dave.
--
Dave Chinner
david@fromorbit.com
prev parent reply other threads:[~2023-11-29 8:59 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-29 7:58 [PATCH v2 0/2] Fixes for ENOSPC xfs_remove Jiachen Zhang
2023-11-29 7:58 ` [PATCH v2 1/2] xfs: ensure logflagsp is initialized in xfs_bmap_del_extent_real Jiachen Zhang
2023-11-29 9:04 ` Dave Chinner
2023-11-29 7:58 ` [PATCH v2 2/2] xfs: update dir3 leaf block metadata after swap Jiachen Zhang
2023-11-29 8:59 ` Dave Chinner [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=ZWb9jMQSjbqqzrob@dread.disaster.area \
--to=david@fromorbit.com \
--cc=allison.henderson@oracle.com \
--cc=bfoster@redhat.com \
--cc=bpm@sgi.com \
--cc=chandan.babu@oracle.com \
--cc=dchinner@redhat.com \
--cc=djwong@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-xfs@vger.kernel.org \
--cc=me@jcix.top \
--cc=xieyongji@bytedance.com \
--cc=zhangjiachen.jaycee@bytedance.com \
--cc=zhangtianci.1997@bytedance.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox