From: bugzilla-daemon@bugzilla.kernel.org
To: linux-xfs@vger.kernel.org
Subject: [Bug 202127] cannot mount or create xfs on a 597T device
Date: Thu, 03 Jan 2019 22:58:41 +0000 [thread overview]
Message-ID: <bug-202127-201763-4eRI0sDhsj@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-202127-201763@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=202127
--- Comment #5 from daimh@umich.edu ---
/dev/sda is a hardware raid. lspci -vvv output is below. By the way, /dev/sda
has been working great with kernel 4.17.5-1-ARCH and mkfs.xfs version 4.17.0. I
can create, mount and copy 200+ T data without any glitches. Further, If I
downgrade linux kernel and xfsprogs, /dev/sda can work.
02:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 3316
[Intruder] (rev 01)
Subsystem: LSI Logic / Symbios Logic MegaRAID SAS 9361-16i
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 26
NUMA node: 0
Region 0: I/O ports at 6000 [size=256]
Region 1: Memory at c7240000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at c7200000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at c7100000 [disabled] [size=1M]
Capabilities: [50] Power Management version 3
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
SlotPowerLimit 0.000W
DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr-
TransPend-
LnkCap: Port #0, Speed 8GT/s, Width x8, ASPM L0s, Exit Latency
L0s <2us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 8GT/s (ok), Width x8 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Range BC, TimeoutDis+, LTR-, OBFF
Not Supported
AtomicOpsCap: 32bit- 64bit- 128bitCAS-
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
AtomicOpsCtl: ReqEn-
LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB,
EqualizationComplete+, EqualizationPhase1+
EqualizationPhase2+, EqualizationPhase3+,
LinkEqualizationRequest+
Capabilities: [d0] Vital Product Data
Not readable
Capabilities: [a8] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [c0] MSI-X: Enable+ Count=97 Masked-
Vector table: BAR=1 offset=0000e000
PBA: BAR=1 offset=0000f000
Capabilities: [100 v2] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt-
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt-
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout-
AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn-
ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 04000001 0018000f 02010000 89faae40
Capabilities: [1e0 v1] Secondary PCI Express <?>
Capabilities: [1c0 v1] Power Budgeting <?>
Capabilities: [148 v1] Alternative Routing-ID Interpretation (ARI)
ARICap: MFVC- ACS-, Next Function: 0
ARICtl: MFVC- ACS-, Function Group: 0
Kernel driver in use: megaraid_sas
Kernel modules: megaraid_sas
--
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2019-01-03 22:58 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-03 19:54 [Bug 202127] New: cannot mount or create xfs on a 597T device bugzilla-daemon
2019-01-03 19:56 ` [Bug 202127] " bugzilla-daemon
2019-01-03 21:13 ` bugzilla-daemon
2019-01-03 22:18 ` bugzilla-daemon
2019-01-03 22:51 ` Dave Chinner
2019-01-03 22:51 ` bugzilla-daemon
2019-01-03 22:58 ` bugzilla-daemon [this message]
2019-01-03 23:22 ` Dave Chinner
2019-01-03 23:08 ` bugzilla-daemon
2019-01-03 23:12 ` bugzilla-daemon
2019-01-03 23:14 ` bugzilla-daemon
2019-01-03 23:17 ` bugzilla-daemon
2019-01-03 23:20 ` bugzilla-daemon
2019-01-03 23:22 ` bugzilla-daemon
2019-01-03 23:24 ` bugzilla-daemon
2019-01-03 23:32 ` bugzilla-daemon
2019-01-04 4:42 ` bugzilla-daemon
2019-01-04 21:59 ` bugzilla-daemon
2019-01-08 16:59 ` Emmanuel Florac
2019-01-04 22:02 ` bugzilla-daemon
2019-01-04 23:03 ` Dave Chinner
2019-01-04 23:03 ` bugzilla-daemon
2019-01-04 23:08 ` bugzilla-daemon
2019-01-05 1:36 ` bugzilla-daemon
2019-01-08 17:06 ` bugzilla-daemon
2019-01-08 17:59 ` bugzilla-daemon
2019-01-22 12:49 ` bugzilla-daemon
2019-01-22 21:52 ` Dave Chinner
2019-01-22 14:18 ` bugzilla-daemon
2019-01-22 14:35 ` bugzilla-daemon
2019-01-22 15:01 ` bugzilla-daemon
2019-01-22 15:36 ` bugzilla-daemon
2019-01-22 15:55 ` bugzilla-daemon
2019-01-22 17:38 ` bugzilla-daemon
2019-01-22 17:48 ` bugzilla-daemon
2019-01-22 17:48 ` bugzilla-daemon
2019-01-22 18:28 ` bugzilla-daemon
2019-01-22 21:52 ` bugzilla-daemon
2019-01-22 21:56 ` bugzilla-daemon
2019-01-22 22:59 ` bugzilla-daemon
2019-01-24 13:02 ` bugzilla-daemon
2019-03-25 8:46 ` bugzilla-daemon
2020-09-24 18:19 ` bugzilla-daemon
2020-09-24 18:52 ` bugzilla-daemon
2020-09-24 18:57 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-202127-201763-4eRI0sDhsj@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).