From: bugzilla-daemon@bugzilla.kernel.org
To: linux-xfs@vger.kernel.org
Subject: [Bug 202441] Possibly vfs cache related replicable xfs regression since 4.19.0 on sata hdd:s
Date: Mon, 28 Jan 2019 23:26:32 +0000 [thread overview]
Message-ID: <bug-202441-201763-InGMajsRVS@https.bugzilla.kernel.org/> (raw)
In-Reply-To: <bug-202441-201763@https.bugzilla.kernel.org/>
https://bugzilla.kernel.org/show_bug.cgi?id=202441
--- Comment #2 from Roger (rogan6710@gmail.com) ---
Hello Dave !
Thanks for the really fast reply :)
Here is most of the (rather lengthy) system information:
Single "eight" core processor:
rogan@trooper:~$ uname -a
Linux trooper.morgoth.org 4.19.18 #2 SMP Sat Jan 26 13:43:16 CST 2019 x86_64
AMD FX(tm)-9590 Eight-Core Processor AuthenticAMD GNU/Linux
root@trooper:~# xfs_repair -V
xfs_repair version 4.19.0
root@trooper:~# cat /proc/meminfo
MemTotal: 24645396 kB
MemFree: 358452 kB
MemAvailable: 22044292 kB
Buffers: 3152 kB
Cached: 22005216 kB
SwapCached: 0 kB
Active: 1713092 kB
Inactive: 21824100 kB
Active(anon): 1157816 kB
Inactive(anon): 555736 kB
Active(file): 555276 kB
Inactive(file): 21268364 kB
Unevictable: 0 kB
Mlocked: 0 kB
SwapTotal: 8388604 kB
SwapFree: 8388604 kB
Dirty: 5980 kB
Writeback: 0 kB
AnonPages: 1528944 kB
Mapped: 531340 kB
Shmem: 254920 kB
Slab: 565012 kB
SReclaimable: 502684 kB
SUnreclaim: 62328 kB
KernelStack: 10448 kB
PageTables: 18100 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 20711300 kB
Committed_AS: 5195092 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 0 kB
VmallocChunk: 0 kB
Percpu: 3232 kB
HardwareCorrupted: 0 kB
AnonHugePages: 0 kB
ShmemHugePages: 0 kB
ShmemPmdMapped: 0 kB
CmaTotal: 0 kB
CmaFree: 0 kB
DirectMap4k: 2698836 kB
DirectMap2M: 22364160 kB
DirectMap1G: 0 kB
root@trooper:~# cat /proc/mounts
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
tmpfs /run tmpfs rw,nosuid,nodev,noexec,relatime,size=32768k,mode=755 0 0
devtmpfs /dev devtmpfs rw,relatime,size=8192k,nr_inodes=3070316,mode=755 0 0
/dev/sda1 / xfs rw,relatime,attr2,inode64,noquota 0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0
tmpfs /dev/shm tmpfs rw,relatime 0 0
cgroup_root /sys/fs/cgroup tmpfs rw,relatime,size=8192k,mode=755 0 0
cpuset /sys/fs/cgroup/cpuset cgroup rw,relatime,cpuset,clone_children 0 0
cpu /sys/fs/cgroup/cpu cgroup rw,relatime,cpu 0 0
cpuacct /sys/fs/cgroup/cpuacct cgroup rw,relatime,cpuacct 0 0
blkio /sys/fs/cgroup/blkio cgroup rw,relatime,blkio 0 0
memory /sys/fs/cgroup/memory cgroup rw,relatime,memory 0 0
devices /sys/fs/cgroup/devices cgroup rw,relatime,devices 0 0
freezer /sys/fs/cgroup/freezer cgroup rw,relatime,freezer 0 0
net_cls /sys/fs/cgroup/net_cls cgroup rw,relatime,net_cls 0 0
perf_event /sys/fs/cgroup/perf_event cgroup
rw,relatime,perf_event,release_agent=/run/cgmanager/agents/cgm-release-agent.perf_event
0 0
net_prio /sys/fs/cgroup/net_prio cgroup rw,relatime,net_prio 0 0
pids /sys/fs/cgroup/pids cgroup
rw,relatime,pids,release_agent=/run/cgmanager/agents/cgm-release-agent.pids 0 0
/dev/sdb1 /home xfs rw,nosuid,nodev,relatime,attr2,inode64,noquota 0 0
192.168.1.2:/export/vol0 /export/vol0 nfs
rw,relatime,vers=3,rsize=8192,wsize=8192,namlen=255,hard,proto=tcp,timeo=10,retrans=2,sec=sys,mountaddr=192.168.1.2,mountvers=3,mountport=887,mountproto=tcp,local_lock=none,addr=192.168.1.2
0 0
192.168.1.2:/export/vol1 /export/vol1 nfs
rw,relatime,vers=3,rsize=8192,wsize=8192,namlen=255,hard,proto=tcp,timeo=10,retrans=2,sec=sys,mountaddr=192.168.1.2,mountvers=3,mountport=887,mountproto=tcp,local_lock=none,addr=192.168.1.2
0 0
192.168.1.2:/export/vol2 /export/vol2 nfs
rw,relatime,vers=3,rsize=8192,wsize=8192,namlen=255,hard,proto=tcp,timeo=10,retrans=2,sec=sys,mountaddr=192.168.1.2,mountvers=3,mountport=887,mountproto=tcp,local_lock=none,addr=192.168.1.2
0 0
192.168.1.2:/export/vol3 /export/vol3 nfs
rw,relatime,vers=3,rsize=8192,wsize=8192,namlen=255,hard,proto=tcp,timeo=10,retrans=2,sec=sys,mountaddr=192.168.1.2,mountvers=3,mountport=887,mountproto=tcp,local_lock=none,addr=192.168.1.2
0 0
192.168.1.2:/export/vol4 /export/vol4 nfs
rw,relatime,vers=3,rsize=8192,wsize=8192,namlen=255,hard,proto=tcp,timeo=10,retrans=2,sec=sys,mountaddr=192.168.1.2,mountvers=3,mountport=887,mountproto=tcp,local_lock=none,addr=192.168.1.2
0 0
devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0
fusectl /sys/fs/fuse/connections fusectl rw,relatime 0 0
gvfsd-fuse /home/rogan/.gvfs fuse.gvfsd-fuse
rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
/dev/sdc1 /mnt/d0 xfs rw,relatime,attr2,inode64,noquota 0 0
/dev/sdd1 /mnt/d1 xfs rw,relatime,attr2,inode64,noquota 0 0
/dev/sde1 /mnt/d2 xfs rw,relatime,attr2,inode64,noquota 0 0
root@trooper:~# cat /proc/partitions
major minor #blocks name
1 0 16384 ram0
1 1 16384 ram1
1 2 16384 ram2
1 3 16384 ram3
1 4 16384 ram4
1 5 16384 ram5
1 6 16384 ram6
1 7 16384 ram7
1 8 16384 ram8
1 9 16384 ram9
1 10 16384 ram10
1 11 16384 ram11
1 12 16384 ram12
1 13 16384 ram13
1 14 16384 ram14
1 15 16384 ram15
8 0 244198584 sda
8 1 244198535 sda1
8 16 468851544 sdb
8 17 468851495 sdb1
8 32 976762584 sdc
8 33 976761560 sdc1
8 48 976762584 sdd
8 49 976761560 sdd1
8 64 976762584 sde
8 65 976761560 sde1
11 0 1048575 sr0
root@trooper:~# hdparm -I /dev/sd[abcde]
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WDS250G2B0A-00SM50
Serial Number: 173859420723
Firmware Revision: X61130WD
Media Serial Num:
Media Manufacturer:
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions,
SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x005e)
Supported: 11 10 9 8 7 6 5
Likely used: 11
Configuration:
Logical max current
cylinders 16383 0
heads 16 0
sectors/track 63 0
--
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 488397168
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 238475 MBytes
device size with M = 1000*1000: 250059 MBytes (250 GB)
cache/buffer size = unknown
Form Factor: 2.5 inch
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = 1
Advanced power management level: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
unknown 119[8]
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
Device-initiated interface power management
Asynchronous notification (eg. media change)
* Software settings preservation
Device Sleep (DEVSLP)
* SANITIZE feature set
* BLOCK_ERASE_EXT command
* DOWNLOAD MICROCODE DMA command
* WRITE BUFFER DMA command
* READ BUFFER DMA command
* Data Set Management TRIM supported (limit 8 blocks)
* Deterministic read ZEROs after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5001b444a973c828
NAA : 5
IEEE OUI : 001b44
Unique ID : 4a973c828
Device Sleep:
DEVSLP Exit Timeout (DETO): 30 ms (drive)
Minimum DEVSLP Assertion Time (MDAT): 30 ms (drive)
Checksum: correct
/dev/sdb:
ATA device, with non-removable media
Model Number: INTEL SSDSC2KW480H6
Serial Number: CVLT62460810480EGN
Firmware Revision: LSF031C
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions,
SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0xffff)
Supported: 10 9 8 7 6 5
Likely used: 10
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 937703088
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 457862 MBytes
device size with M = 1000*1000: 480103 MBytes (480 GB)
cache/buffer size = unknown
Form Factor: 2.5 inch
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
Device Sleep (DEVSLP)
* SMART Command Transport (SCT) feature set
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
* SANITIZE feature set
* CRYPTO_SCRAMBLE_EXT command
* BLOCK_ERASE_EXT command
* reserved 69[4]
* DOWNLOAD MICROCODE DMA command
* WRITE BUFFER DMA command
* READ BUFFER DMA command
* Data Set Management TRIM supported (limit 8 blocks)
* Deterministic read data after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
4min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 55cd2e414d07e84e
NAA : 5
IEEE OUI : 5cd2e4
Unique ID : 14d07e84e
Device Sleep:
DEVSLP Exit Timeout (DETO): 20 ms (drive)
Minimum DEVSLP Assertion Time (MDAT): 31 ms (drive)
Checksum: correct
/dev/sdc:
ATA device, with non-removable media
Model Number: ST1000DM003-1ER162
Serial Number: Z4Y5FJF6
Firmware Revision: CC45
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev
2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x001f)
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1953525168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 953869 MBytes
device size with M = 1000*1000: 1000204 MBytes (1000 GB)
cache/buffer size = unknown
Form Factor: 3.5 inch
Nominal Media Rotation Rate: 7200
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 254
Recommended acoustic management value: 208, current value: 208
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* unknown 119[6]
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
unknown 78[7]
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
unknown 206[7]
unknown 206[12] (vendor specific)
* SANITIZE feature set
* OVERWRITE_EXT command
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
100min for SECURITY ERASE UNIT. 100min for ENHANCED SECURITY ERASE
UNIT.
Logical Unit WWN Device Identifier: 5000c5007aab9de1
NAA : 5
IEEE OUI : 000c50
Unique ID : 07aab9de1
Checksum: correct
/dev/sdd:
ATA device, with non-removable media
Model Number: ST1000DM003-1ER162
Serial Number: Z4Y1SAVG
Firmware Revision: CC43
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev
2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x001f)
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1953525168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 953869 MBytes
device size with M = 1000*1000: 1000204 MBytes (1000 GB)
cache/buffer size = unknown
Form Factor: 3.5 inch
Nominal Media Rotation Rate: 7200
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 254
Recommended acoustic management value: 208, current value: 208
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* unknown 119[6]
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
unknown 78[7]
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
unknown 206[7]
unknown 206[12] (vendor specific)
* SANITIZE feature set
* OVERWRITE_EXT command
* reserved 69[7]
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
98min for SECURITY ERASE UNIT. 98min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000c500793959c3
NAA : 5
IEEE OUI : 000c50
Unique ID : 0793959c3
Checksum: correct
/dev/sde:
ATA device, with non-removable media
Model Number: ST1000DM003-1ER162
Serial Number: Z4Y9C367
Firmware Revision: CC45
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev
2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x001f)
Supported: 9 8 7 6 5
Likely used: 9
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 1953525168
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 953869 MBytes
device size with M = 1000*1000: 1000204 MBytes (1000 GB)
cache/buffer size = unknown
Form Factor: 3.5 inch
Nominal Media Rotation Rate: 7200
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 254
Recommended acoustic management value: 208, current value: 208
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* unknown 119[6]
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
unknown 78[7]
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
unknown 206[7]
unknown 206[12] (vendor specific)
* SANITIZE feature set
* OVERWRITE_EXT command
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
104min for SECURITY ERASE UNIT. 104min for ENHANCED SECURITY ERASE
UNIT.
Logical Unit WWN Device Identifier: 5000c50086e4bcd4
NAA : 5
IEEE OUI : 000c50
Unique ID : 086e4bcd4
Checksum: correct
xfs_info /dev/sdc1
xfs_info: /dev/sdc1 contains a mounted filesystem
fatal error -- couldn't initialize XFS library
hmm ?
root@trooper:~# umount /mnt/d0/
root@trooper:~# umount /mnt/d1/
root@trooper:~# umount /mnt/d2/
root@trooper:~# xfs_info /dev/sdc1
meta-data=/dev/sdc1 isize=512 agcount=4, agsize=61047598 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=0
data = bsize=4096 blocks=244190390, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=119233, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
xfs_info /dev/sdd1
meta-data=/dev/sdd1 isize=512 agcount=4, agsize=61047598 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=0
data = bsize=4096 blocks=244190390, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=119233, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
root@trooper:~# xfs_info /dev/sde1
meta-data=/dev/sde1 isize=512 agcount=4, agsize=61047598 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=0
= reflink=0
data = bsize=4096 blocks=244190390, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1
log =internal log bsize=4096 blocks=119233, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
/home and / (on ssd's) are made with the older version of mkfs.xfs so they
don't have the sparse inode feature enabled. And I have tested both versions of
mkfs.xfs with the exact same result unfortunately. Otherwise all systems are
made with default options (i.e. no options).
I knew about that vfs_cache_pressure=0 "drawback", it's not a fix :(
While testing I have never seen any tendency to swap. I have tested with
swappiness=100 and different swap sizes and areas and even a swap file now
(thanks for the recent fallocate addition, much appreciated :) ).
I'll do a quick run and give you some dmesg
--
You are receiving this mail because:
You are watching the assignee of the bug.
next prev parent reply other threads:[~2019-01-28 23:26 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-01-28 20:41 [Bug 202441] New: Possibly vfs cache related replicable xfs regression since 4.19.0 on sata hdd:s bugzilla-daemon
2019-01-28 22:00 ` Dave Chinner
2019-01-28 22:00 ` [Bug 202441] " bugzilla-daemon
2019-01-28 23:26 ` bugzilla-daemon [this message]
2019-01-29 0:29 ` Dave Chinner
2019-01-29 0:29 ` bugzilla-daemon
2019-01-29 0:43 ` bugzilla-daemon
2019-01-29 1:23 ` Dave Chinner
2019-01-29 0:47 ` bugzilla-daemon
2019-01-29 1:23 ` bugzilla-daemon
2019-01-29 3:36 ` bugzilla-daemon
2019-01-29 9:09 ` bugzilla-daemon
2019-01-29 9:11 ` bugzilla-daemon
2019-01-29 9:27 ` bugzilla-daemon
2019-01-29 9:29 ` bugzilla-daemon
2019-01-29 17:55 ` bugzilla-daemon
2019-01-29 21:41 ` Dave Chinner
2019-01-29 21:19 ` bugzilla-daemon
2019-01-29 21:44 ` Dave Chinner
2019-01-29 21:41 ` bugzilla-daemon
2019-01-29 21:53 ` Dave Chinner
2019-01-29 21:44 ` bugzilla-daemon
2019-01-29 21:53 ` bugzilla-daemon
2019-01-29 22:07 ` bugzilla-daemon
2019-01-29 22:19 ` bugzilla-daemon
2019-01-29 22:23 ` bugzilla-daemon
2019-01-29 22:39 ` bugzilla-daemon
2019-01-29 23:03 ` bugzilla-daemon
2019-01-29 23:28 ` Dave Chinner
2019-01-29 23:28 ` bugzilla-daemon
2019-01-29 23:35 ` bugzilla-daemon
2019-01-30 10:50 ` bugzilla-daemon
2019-01-30 12:00 ` bugzilla-daemon
2019-02-01 21:59 ` bugzilla-daemon
2019-02-03 8:12 ` bugzilla-daemon
2021-11-23 15:43 ` bugzilla-daemon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bug-202441-201763-InGMajsRVS@https.bugzilla.kernel.org/ \
--to=bugzilla-daemon@bugzilla.kernel.org \
--cc=linux-xfs@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).