From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail.netspace.net.au (whirlwind.netspace.net.au [203.10.110.76]) by ozlabs.org (Postfix) with ESMTP id 00EBC67A46 for ; Sat, 5 Feb 2005 04:33:25 +1100 (EST) Received: from supernova (220-253-48-46.VIC.netspace.net.au [220.253.48.46]) by mail.netspace.net.au (Postfix) with ESMTP id 3103B10CB4F for ; Sat, 5 Feb 2005 04:13:01 +1100 (EST) From: "Linas Petras" To: Date: Sat, 5 Feb 2005 04:13:01 +1100 Message-ID: <000001c50adc$c814dae0$6401a8c0@supernova> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Subject: Problems with Serial Port on IceCube List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Hi All I'm running Sylvain Munaut's version of 2.6.10-rc2 with DENX's 3.1 ELDK = as the cross compile tools with nfs mounted root filesystem and I seem to have a = probelm when I'm=20 connected to the "icecube" development boards serial port. I get the u-boot 1.1.3 bootrom messages from the serial port on the "icecube" and can=20 boot the kernel using the serial port but I don't get any messages after = the early=20 boot message "arch: exit". It appeared to me that the board was booting = so I tried to=20 telnet via the network to the board and this worked fine. So the kernel = is running, I=20 just don't get the "normal" bootup messages from the kernel. If I use the standard DENX 2.4.25 kernel I get all the message going to = the serial=20 port OK. Any ideas of whats going on ????? Is their a problem with the console support in=20 Sylvain's port or something in the "standard" init scripts that come = with DENX's ELDK=20 3.1 when used with a 2.6.xx kernel or have I missed something obvious? Linas Petras ------------ I know not with which weapons World War III will be faught, but World = War IV will be faught with sticks and stones. - Albert Einstein.