From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from postfix2-g20.free.fr (postfix2-g20.free.fr [212.27.60.43]) by ozlabs.org (Postfix) with ESMTP id 648BCDDDF3 for ; Thu, 11 Jan 2007 04:49:13 +1100 (EST) Received: from smtp1-g19.free.fr (smtp1-g19.free.fr [212.27.42.27]) by postfix2-g20.free.fr (Postfix) with ESMTP id BB2408D119F for ; Wed, 10 Jan 2007 17:16:52 +0100 (CET) Received: from CRESITTLAB (sou45-1-82-229-118-71.fbx.proxad.net [82.229.118.71]) by smtp1-g19.free.fr (Postfix) with ESMTP id AE1729B7D9 for ; Wed, 10 Jan 2007 18:16:40 +0100 (CET) From: "alayrac" To: Subject: Kernel 2.6.17.1 start hangs after Now booting the kernel Date: Wed, 10 Jan 2007 18:16:39 +0100 Message-ID: <000001c734db$1913d200$c900a8c0@CRESITTLAB> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , I've follwed discusion of Ming, Pradeep, Robert and Ameet on that mailing list and tried to use teir shared experience to put linux 2.6.17.1 with TEMAC on ML403 board. I use EDK 8.2 SP2. So I get on http://www.linux.get2knowmore.com to get kernel source code and follow instructions to setup configuration. I've strictely followed instructions and get the following error at boot time. Only the xparameters_ml403.h has been updated in kernel source tree to fit the one generated by Xilinx EDK toolchain (with SP2 it is xparameters_ml40x.h) <-------------------snip---------------------------> loaded at: 00400000 004F213C board data at: 004F0124 004F013C relocated to: 004050EC 00405104 zimage at: 00405801 004EF0EC avail ram: 004F3000 01000000 Linux/PPC load: console=ttyS0,9600 root=/dev/xsa2 rw Uncompressing Linux...done. Now booting the kernel <-------------------snip---------------------------> The hardware is one made from scratch to include TEMAC, DDR, UART_16550. The process has worked on ML403 reference design with same procedure, but with EDK2 SP1 and the all BSP as been copied to the kernel tree. I'd like to know if some of you face same problems? I suspect hardware rather than the kernel to be the reason but I did not succeed to figure it out. Can any one give me a track? Does someone have an EDK mhs, and mss files available for an ML403 with TEMAC design? If some of you are interested I can send my own mhs and mss file if it could help. Just for information I've also tried to apply xuvpro patch, temac patch (from mvista source code web site) as well as sysace_after_Temac pacth. The only change is the bauderate, xuvpro patch change it to 38400! On that last point in that 38400 defalt config how serial link is manage with a boot command console=ttyS0,9600? Chris CRESITT INDUSTRIE 12 Rue de Blois, BP6744 45067 ORLEANS Cedex 2 Tel : 02.38.49.45.59 Fax :02.38.49.45.55 Email : christophe.alayrac@cresitt.com Web : http://www.cresitt.com