From mboxrd@z Thu Jan 1 00:00:00 1970 Reply-To: From: "John Zhou" To: , Subject: RE: [Linux] Problem with booting Linux Date: Thu, 19 Jun 2003 17:24:25 +0800 Message-ID: <000101c33644$93872710$0200a8c0@john> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" In-Reply-To: Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: do you have any FPGA or CPLD on your board. if it is, your kernel should have delay time before loading FPGA or CPLD image. Maybe halt has completed this action. -----Original Message----- From: owner-linuxppc-embedded@lists.linuxppc.org [mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of Christophe.LINDHEIMER@fr.thalesgroup.com Sent: Thursday, June 19, 2003 5:19 PM To: linuxppc-embedded@lists.linuxppc.org Subject: [Linux] Problem with booting Linux Hi. I am working on Linux on a 860 target. I use UBoot as bootloader & a BDI2000. In Bdi, if I make reset run go Then in Uboot bootm 0x43000000 Linux hangs when trying to start init. In Bdi, if I make reset run halt go Then in Uboot bootm 0x43000000 Linux works fine It seems that the fact to make a halt before running makes the init works !!! Ever seen that ? Ideas ? Thanks Chris ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/