From mboxrd@z Thu Jan 1 00:00:00 1970 Reply-To: From: "John Zhou" To: "'Lokesh Kumar'" , Subject: RE: scc1 serial Date: Fri, 22 Aug 2003 12:41:22 +0800 Message-ID: <000201c36867$a3a58600$9f02a8c0@newrock2> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" In-Reply-To: <3439AB3A99ECD5409F3A52ACF814744D158D66@norcom2.norcom.net> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: You should read the file uart.c (\arch\ppc\8xx_io\uart.c), and give you some modification. luck to you. -----Original Message----- From: owner-linuxppc-embedded@lists.linuxppc.org [mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of Lokesh Kumar Sent: Thursday, August 21, 2003 5:38 AM To: linuxppc-embedded@lists.linuxppc.org Subject: scc1 serial Hi Everybody, I have 855T based board, and have 2.4.18 kernel on it. The console is on SMC1. I want to configure SCC1 as serial as well. To do that, I took uart.c file from denx eldk, and the Config.in as well. My question - is that it, or do I need to change any more files, before I configure SCC1 and UART? Lokesh Kumar Wireless Matrix USA Inc. 703-262-4032 ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/