From: "John Fisher" <John.Fisher@nec.com.au>
To: <linuxppc-embedded@lists.linuxppc.org>
Subject: cygwin and embedded linux
Date: Wed, 21 Aug 2002 17:58:54 +1000 [thread overview]
Message-ID: <000301c248e8$9a2ce040$37d34c93@neca.nec.com.au> (raw)
Is anyone seriously trying to do embedded Linux development for power PC
using Cygwin as the host?
I'm trying to get linux running on proprietary MPC850/860/8260 boards. I'll
start with either the 850 or the 860 board as I'm more familiar with these
processors than with the 8260.
I have the Macraigor blackbird BDM interface for the MPC850/860. I have both
an Agilent ethernet based probe and the Wind River Vision Probe II for the
8260.
All boards will be running with plenty of flash and RAM: 16MB and 32MB
respectively for both the 850 and 860 boards. They will be running with no
disk drive, no monitor and a serial port on SCC3.
I may have real time requirements, but this is yet to be determined.
This is a learning exercise at this stage.
John Fisher
NEC Australia Pty Ltd
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2002-08-21 7:58 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2002-08-21 7:58 John Fisher [this message]
2002-08-21 14:54 ` cygwin and embedded linux Magnus Damm
2002-08-21 15:54 ` Marius Groeger
2002-08-22 1:15 ` John Fisher
2002-08-22 3:20 ` Pete McCormick
2002-08-22 6:56 ` Wolfgang Denk
2002-08-23 0:05 ` Dr. Craig Hollabaugh
2002-08-22 7:36 ` Marius Groeger
2002-08-23 13:13 ` Marius Groeger
2002-08-22 11:00 ` Magnus Damm
2002-08-23 13:10 ` Jerry Van Baren
[not found] ` <Pine.LNX.4.40.0208220914420.2118-100000@mag.devdep.sysgo.d e>
2002-08-22 23:39 ` Dr. Craig Hollabaugh
2002-08-23 5:18 ` Dan Malek
2002-08-23 7:03 ` Dr. Craig Hollabaugh
2002-08-23 9:34 ` Kenneth Johansson
2002-08-24 0:11 ` Dan Malek
2002-08-27 10:24 ` Sangmoon Kim
2002-08-23 9:15 ` Magnus Damm
2002-08-23 12:56 ` Jerry Van Baren
2002-08-23 5:03 ` Dan Taylor
-- strict thread matches above, loose matches on Subject: below --
2002-08-21 15:07 Steven Blakeslee
2002-08-22 13:06 Hihn Jason
2002-08-22 23:48 Kerl, John
2002-08-22 23:50 Kerl, John
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000301c248e8$9a2ce040$37d34c93@neca.nec.com.au' \
--to=john.fisher@nec.com.au \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).