From mboxrd@z Thu Jan 1 00:00:00 1970 Reply-To: From: "John Fisher" To: Subject: cygwin and embedded linux Date: Wed, 21 Aug 2002 17:58:54 +1000 Message-ID: <000301c248e8$9a2ce040$37d34c93@neca.nec.com.au> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Is anyone seriously trying to do embedded Linux development for power PC using Cygwin as the host? I'm trying to get linux running on proprietary MPC850/860/8260 boards. I'll start with either the 850 or the 860 board as I'm more familiar with these processors than with the 8260. I have the Macraigor blackbird BDM interface for the MPC850/860. I have both an Agilent ethernet based probe and the Wind River Vision Probe II for the 8260. All boards will be running with plenty of flash and RAM: 16MB and 32MB respectively for both the 850 and 860 boards. They will be running with no disk drive, no monitor and a serial port on SCC3. I may have real time requirements, but this is yet to be determined. This is a learning exercise at this stage. John Fisher NEC Australia Pty Ltd ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/