From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Fri, 15 Aug 2003 11:00:41 -0700 From: Ron Bianco Subject: RE: MPC7410 doesn't work with linux-2.4.20-denx In-reply-to: <20030815084215.BE92CC59E4@atlas.denx.de> To: linuxppc-embedded@lists.linuxppc.org Message-id: <000301c36357$240d93c0$4d00a8c0@warp-speed> MIME-version: 1.0 Content-type: text/plain; charset=iso-8859-1 Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I'm curious as to what an MPC8260 is doing on a board based on an MPC7410? Is this a dual processor board? Ron > > Dear Christian, > > in message <200308141128.h7EBSnQ06089@mailgate5.cinetic.de> you wrote: > > > > I'm currently trying to get linux running on an embedded board: > > * MPC7410 Rev.1.4 > > * PowerQUICC (MPC 8260) > > * RAM: 128 MB > > * Flash: 64 MB > > * Kernel: 2.4.20-denx > > > > For some reason, it doesn't boot properly. It says "Now booting Linux", > > after that something triggers a hard reset. For the last 2 weeks I tried > > A couple of questions: > > * Which bootloader are you using? > * Are you sure that the SDRAM initialization is correct? > * Are you sure the information passed from the bootloader to the Linux > kernel (memory size, clocks, ...) is correct? > * Finally: did you disable the software watchdog? > > > Best regards, > > Wolfgang Denk > > -- > Software Engineering: Embedded and Realtime Systems, Embedded Linux > Phone: (+49)-8142-4596-87 Fax: (+49)-8142-4596-88 Email: wd@denx.de > If you fail to plan, plan to fail. > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/