From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <000601c14a6d$d9b4a5b0$020aa8c0@dimbar> From: "Nils Krueger" To: "Geert Uytterhoeven" , "Tom Rini" Cc: "Linux/PPC Development" References: Subject: Re: PowerStack interrupt?problem Date: Mon, 1 Oct 2001 13:40:19 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: > > Goody, which? :) I've got a 604/100 right here. > > The one that looks like a HiFi, with 133 MHz 604. It's called PowerStack Series E. > > Hmm. I sort-of wonder if the PS/2 changes a while back goofed something up. > > My kbd is fine too, and I'll try and throw a mouse on later this week. > > Can you grab the bk version and go back to 2.4.8, .7, et al and see if > > it works? I think some PS/2 stuff was done in maybe .5 or .6.. I had the same problem with 2.4.5, .7-pre3 and .8-pre3. I haven't watched the interrupts then, but it showed the same symptoms. (keyboard, mouse, network, scsi are stalled but graphic card is still working) This night I compiled 2.4.10-pre12 (from MontaVista rsync) and still the same. (Thank you, Geert, the video-mode kernel parameter works fine; fbcon gives me 1024x768 directly after bootup now) One keypress or release of a mouse button causes about 20 interrupts and sometimes one or two BAD interrupts. (BTW, it's the same on my so far most stable 2.2.17) Should be normally 4 interrupts (and of course no BAD one)? > but the owner promised to join > the mailing list, so I hope he'll do. ACK Nilz. -- http://www.hoschi.de/nilz (Nilz' Homepage) ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/