From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <000601c32006$5222a280$346ab796@corebellhychon> From: =?ks_c_5601-1987?B?wPzH/b+1?= To: "Mark A. Greer" Cc: References: <000b01c31f5a$fcfc80b0$346ab796@corebellhychon> <3ECBC077.2030903@mvista.com> Subject: Re: how to kernel booting on MCP750 board Date: Thu, 22 May 2003 11:03:15 +0900 MIME-Version: 1.0 Content-Type: text/plain; charset="ks_c_5601-1987" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Thanks your answer. But you are misunderstand my-Question, I'm working that is booting kernel on MCP750 target board. But it not do good working. it's display following error. I using the kernel source(v2.4.2) from CDK2.0 and compile is OK. But when I execute "boot" command, it is occur exception error. === Error Message ============== PPC1-Bug> PPC1-Bug>nbo 0 0 10.10.10.2 10.10.10.1 vmlinux.bin Network Booting from: DEC21140, Controller 0, Device 0 Device Name: /pci@80000000/pci1011,9@e,0:0,0 Loading: vmlinux.bin Client IP Address = 10.10.10.2 Server IP Address = 10.10.10.1 Gateway IP Address = 0.0.0.0 Subnet IP Address Mask = 255.0.0.0 Boot File Name = vmlinux.bin Argument File Name = Network Boot File load in progress... To abort hit Bytes Received =&1445904, Bytes Loaded =&1445904 Bytes/Second =&481968, Elapsed Time =3 Second(s) Residual-Data Located at: $01F88000 Exception: Program (Illegal Instruction) SRR0 =A6440000 SRR1 =00083040 Vector-Offset =00700 IP =A6440000 MSR =00003040 CR =00000000 FPSCR =00012000 R0 =00000000 R1 =01F88000 R2 =00000000 R3 =01F88000 R4 =00005000 R5 =00000000 R6 =00000000 R7 =00000000 R8 =00000000 R9 =00000000 R10 =00000000 R11 =00000000 R12 =00000000 R13 =00000000 R14 =00000000 R15 =00000000 R16 =00000000 R17 =00000000 R18 =00000000 R19 =00000000 R20 =00000000 R21 =00000000 R22 =00000000 R23 =00000000 R24 =00000000 R25 =00000000 R26 =00000000 R27 =00000000 R28 =00000000 R29 =00000000 R30 =00000000 R31 =00000000 SPR0 =00100500 SPR1 =00000000 SPR8 =00000000 SPR9 =00000000 A6440000 02F20C63 WORD $02F20C63 PPC1-Bug> ================================ I think that it problem are either bad compile kernel image or bad download and execute address. As you say, If it alreay done, Can you give me sample kernel image or tell me reference sites. ----- Original Message ----- From: "Mark A. Greer" Sent: Thursday, May 22, 2003 3:07 AM Subject: Re: how to kernel booting on MCP750 board > ÀüÇý¿µ wrote: > > >I'm porting mvista linux-2.4.2 on the motorola mpc750 board. > > > Why? Its already done. ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/