From: "Tjernlund" <tjernlund@telia.com>
To: <linuxppc-embedded@lists.linuxppc.org>
Subject: Power on startup problem
Date: Fri, 29 Jun 2001 00:52:44 +0200 [thread overview]
Message-ID: <000701c10025$0e91a320$c497143e@jocke> (raw)
Hi
My custom MPC860 board does not start at power on. All that
happens is that the SW Watchdog resets the system after 5 seconds.
But if I connect my Abatron BDI2000 emulator with a stripped config file
that don't initialize any registers and type go at the telnet prompt
everything
is OK.
I am running PPCboot from Intel flash. The board has a 5MHz clock source and
is multiplied to 25 MHz during powerup.
Another problem,possibly related, is that I am unable to run the CPU at
higher
speeds than 40 MHz(and yes I run the bus at half CPU speed). According
to the emulator I get a external reset when I run at higher speeds.
Any pointers are most welcome :-)
Joakim
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
reply other threads:[~2001-06-28 22:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000701c10025$0e91a320$c497143e@jocke' \
--to=tjernlund@telia.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox