Hi,
Excuse me for posting
this message again. I forgot to change the subject.
As I am not sure of the cause of
the below mentioned error, I have mailed this to both uboot and LinuxPPC group.
We are trying to port linux 2.4.20
for the mpc8280 Rattler board. Kernel boot seems to stop after printing
"Now booting the kernel".
But from the log buffer(Starting
at 0x194654) dump it looks like it is
well crossing this stage.
The last message that was dumped
in the log buffer is:
00194EB4: 3C 34 3E 65 74 68 30
3A 20 63 6F 6E 66 69 67 3A |<4>eth0:
config:|
00194EC4: 20 61 75 74 6F 2D 6E
65 67 6F 74 69 61 74 69 6F | auto-
negotiatio|
00194ED4: 6E 20 6F 6E 2C 20 31
30 30 48 44 58 2C 20 31 30 |n on,
100HDX, 10|
00194EE4: 48 44 58 2E 0A 00 00
00 00 00 00 00 00 00 00 00 |
HDX.............|
00194EF4: 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00
|................|
The boot loader used is u-boot.
Any pointers to why messages
after "Now booting the kernel" are not
getting on to the console ?.Is it
that I am missing some patch?
Thanks everybody for your time.
regards,
C.R.