From: 전혜영 <hychon@corebell.co.kr>
To: <linuxppc-embedded@lists.linuxppc.org>
Subject: how to kernel booting on MCP750 board
Date: Wed, 21 May 2003 14:36:42 +0900 [thread overview]
Message-ID: <000b01c31f5a$fcfc80b0$346ab796@corebellhychon> (raw)
hello!!
I'm porting mvista linux-2.4.2 on the motorola mpc750 board.
But it's not good working, It's occur Exception.
Its error message is attach at below.
Of course, I have read some manual (about PPC-Bug and MCP750 Booting).
But I don't know why it is not good working?
Can you tell me some advices about "how to make a kernel image" and "how to booting kernel image"
I want to know configuration information for download and booting with kernel at PPC-BUG.
Thanks you for read
-----------ERROR----------------------
Copyright Motorola Inc. 1988 - 1997, All Rights Reserved
PPC1 Debugger/Diagnostics Release Version 3.4 - 12/03/97 RM01
COLD Start
Local Memory Found =02000000 (&33554432)
MPU Clock Speed =233Mhz
BUS Clock Speed =67Mhz
WARNING: Keyboard Not Connected
Reset Vector Location : ROM Bank B
Mezzanine Configuration: Single-MPU
Current 60X-Bus Master : MPU0
Idle MPU(s) : NONE
System Memory: 32MB, ECC Enabled (ECC-Memory Detected)
L2Cache: 1024KB, 117Mhz
PPC1-Bug>
PPC1-Bug>
PPC1-Bug>nbo 0 0 10.10.10.2 10.10.10.1 vmlinux.bin
Network Booting from: DEC21140, Controller 0, Device 0
Device Name: /pci@80000000/pci1011,9@e,0:0,0
Loading: vmlinux.bin
Client IP Address = 10.10.10.2
Server IP Address = 10.10.10.1
Gateway IP Address = 0.0.0.0
Subnet IP Address Mask = 255.0.0.0
Boot File Name = vmlinux.bin
Argument File Name =
Network Boot File load in progress... To abort hit <BREAK>
Bytes Received =&1445904, Bytes Loaded =&1445904
Bytes/Second =&481968, Elapsed Time =3 Second(s)
Residual-Data Located at: $01F88000
Exception: Program (Illegal Instruction)
SRR0 =A6440000 SRR1 =00083040 Vector-Offset =00700
IP =A6440000 MSR =00003040 CR =00000000 FPSCR =00012000
R0 =00000000 R1 =01F88000 R2 =00000000 R3 =01F88000
R4 =00005000 R5 =00000000 R6 =00000000 R7 =00000000
R8 =00000000 R9 =00000000 R10 =00000000 R11 =00000000
R12 =00000000 R13 =00000000 R14 =00000000 R15 =00000000
R16 =00000000 R17 =00000000 R18 =00000000 R19 =00000000
R20 =00000000 R21 =00000000 R22 =00000000 R23 =00000000
R24 =00000000 R25 =00000000 R26 =00000000 R27 =00000000
R28 =00000000 R29 =00000000 R30 =00000000 R31 =00000000
SPR0 =00100500 SPR1 =00000000 SPR8 =00000000 SPR9 =00000000
A6440000 02F20C63 WORD $02F20C63
PPC1-Bug>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2003-05-21 5:36 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-05-21 5:36 전혜영 [this message]
2003-05-21 18:07 ` how to kernel booting on MCP750 board Mark A. Greer
2003-05-22 2:03 ` 전혜영
2003-05-22 3:59 ` Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='000b01c31f5a$fcfc80b0$346ab796@corebellhychon' \
--to=hychon@corebell.co.kr \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).