From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <000b01c45534$8542bba0$0301a8c0@chuck2> From: "Mark Chambers" To: "Andrew Dennison" , References: <002601c454f4$13e589a0$ee00a8c0@CAT> Subject: Re: JTAG debuggers for Motorola 8xx/82xx/85xx Date: Fri, 18 Jun 2004 09:02:30 -0400 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Andrew, I went down this same path! No, the 5200 JTAG is quite different from 8xx and a little different from 8xxx so no version of the Wiggler will work, although Macraigor says they are planning to support 5200 soon. When I was evaluating the 5200Lite I used the Motorola boot to load zImage.elf, and that let me play with linux. I hope Greenhills and Metrowerks are listening - their debuggers are unusable in IMHO. As a hardware designer I'm typically the guy who recommends a debugger to the programmers, so if they don't have a tool that lets you poke around without a whole project structure, they're not going to get my vote. So, another win for BDI, I guess. Mark Chambers ----- Original Message ----- From: "Andrew Dennison" To: Sent: Friday, June 18, 2004 1:21 AM Subject: RE: JTAG debuggers for Motorola 8xx/82xx/85xx > > > Wolfgang wrote: > > > > Note that the GDB in our ELDK not only supports the BDM4GDB, but also > > the wiggler ... > > > > So I could use a wiggler and GDB from ELDK with MPC5200? > > I've been asked to try to avoid buying a BDI2000 for now :( > > I already have the Greenhills slingshot and Metrowerks Wiretap from the > 5200lite kit but they seem to be paper weights without their (expensive) > integrated software tools... > > Andrew > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/