Re: [Buildroot] zImage.embedded

["Ulf Samuelsson" <ulf.samuelsson@atmel.com>]

> [cross posting from one mailing list to another]
>=20
>>>  is the file zImage.elf my proper network image ?
>>
>> What bootloader is on your board?  zImage.elf *might* be the proper
>> image.  If you're using u-boot, then you want to build a uImage
>> instead.
>=20
> I'm trying to compile u-boot with buildroot, but it fails with:
>=20
>                /usr/bin/make -j1 -C=20
> =
/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc/=
genepy/u-boot-1.3.2=20
> \
>                ""_config
> make[1]: Entering directory=20
> =
`/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc=
/genepy/u-boot-1.3.2'
> make[1]: *** No rule to make target `_config'.  Stop.
> make[1]: Leaving directory=20
> =
`/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc=
/genepy/u-boot-1.3.2'
> make: ***=20
> =
[/home/guinevere/Min_UartLite_NetLite_Ace/buildroot/project_build_powerpc=
/genepy/u-boot-1.3.2/.configured]=20
> Error 2
>=20
> Apparently it expects a BOARD_NAME variable, but I don't know what to =
put in=20
> it (I looked at the makefile and can't find the ml405 referenced in =
there).
> --=20
> Guillaume Dargaud
> http://www.gdargaud.net/
>=20


I think you need to figure out how to build u-boot for your board
outside buildroot, before you try to build it inside buildroot.


Best Regards
Ulf Samuelsson