From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <001601c3ebe7$5ba13490$30c8a8c0@zorans> From: "Zoran Stojsavljevic" To: "Gilad Rom" , "Alex Zeffertt" Cc: , References: <1075117282.1504.17.camel@zambia.cambridgebroadband.com> <019201c3e413$7f45d3a0$026810ac@gilad> <1075125571.1504.28.camel@zambia.cambridgebroadband.com> <01a701c3e415$3a49ff40$026810ac@gilad> Subject: Re: [Linux-ATM-General] Announcement: MPHY now supported inmpc860sar Date: Thu, 5 Feb 2004 13:54:13 +0100 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Quick question to you all... I walked through Pete's 8260 ATM driver, and I saw (as far as I can understand) that Pete's driver is set to support single PHY mode. So, the question here is: do we need Rodolfo Giometti's patch to be applied to mpc8260 ATM driver? It is obvious that different set-up should be applied for mpc8260 ATM driver MPHY mode anyway... Thank you for answers in advance. Regards, Zoran Stojsavljevic DKTS Pupin Telecom ----- Original Message ----- From: "Gilad Rom" Sent: Monday, January 26, 2004 3:03 PM Subject: Re: [Linux-ATM-General] Announcement: MPHY now supported in mpc860sar > And now for my next question - Do you think the driver should run on > the 82xx family of chips? (e.g. 8260 and the likes) these guys have 2 > Utopia-II ports with support for up to 31 devices per port. Coupled > with this software, it could make for a highly efficient DSLAM. > > ----- Original Message ----- > From: "Alex Zeffertt" > Sent: Monday, January 26, 2004 3:59 PM > Subject: Re: [Linux-ATM-General] Announcement: MPHY now supported in mpc860sar > > > It is currently only supported in SAR mode, and in that mode there > > is an upper limit of 4 UTOPIA phys. However, there's no reason that > > support can't be added for MPHY in ESAR mode - in which the limit is > > 31 phys. I suspect that adding such support would be easier now that > > Rodolfo has done most of the work. > > > > PS I'm not the expert on this. Rodolfo's sourceforge username is > > "zaigor". > > > > On Mon, 2004-01-26 at 13:51, Gilad Rom wrote: > > > This is very exciting news! (well, for me it is) > > > > > > How many PHY's in parallel are we talking about here? > > > > > > ----- Original Message ----- > > > From: "Alex Zeffertt" > > > Sent: Monday, January 26, 2004 1:41 PM > > > Subject: [Linux-ATM-General] Announcement: MPHY now supported in mpc860sar > > > > > > > Just a quick note to say that multi-phy is now supported by the > > > > mpc860sar ATM driver, thanks to a patch by Rodolfo Giometti. > > > > > > > > Page: http://sourceforge.net/projects/mpc860sar/ ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/