From: "John Zhou" <zjzhou@newrocktech.com>
To: <m.venkatraj@exgate.tek.com>, <linuxppc-embedded@lists.linuxppc.org>
Subject: RE: ADS860 - unable to load kernel- Bad magic number
Date: Fri, 27 Feb 2004 12:45:13 +0800 [thread overview]
Message-ID: <001601c3fcec$7d5500b0$b702a8c0@newrock2> (raw)
In-Reply-To: <301A812E6528D511A8F70008C71E578601FCF4F6@ap-bang-m02.india.tek.com>
(1) you can seenv verify=n, then boot image. if it is OK, then the
length of image when you burned into flash is short for several bytes.
(2) you'd better take a look at doc of www.denx.de/...
good luck for you!
-----Original Message-----
From: m.venkatraj@exgate.tek.com
Sent: Friday, February 27, 2004 12:35 PM
Subject: ADS860 - unable to load kernel- Bad magic number
I am a linux-newbie working on a parallel track on the MPC 860, on a ADS
board. I am facing difficulty in getting the kernel to load. This is
what I have done so far:
- built a cross-toolchain using Dan Kegel's crosstool.
- built u-boot-1.0.1 and flashed it to the board using BDI2000
- built linus-2.4.22, (with the below mentioned patch on last attempt).
The compilation goes through fine, I get "vmlinux" on the top-dir, and
also a vmlinux.gz in the arch/ppc/boot/images if I do a "make zImage".
When I configure bootp, and bootup the board, u-boot comes up fine, the
tftp download of the kernel image goes through fine too. Then I am stuck
with a "Bad Magic Number". Some initial digup led me to a mismatched
image header magic number.
Could anyone please help me with how to go ahead? Am I missing
something?
Also thanks to everyone whose postings on this and other lists helped me
get started!
-----Original Message-----
From: Xavier Miville [mailto:xmiville@oerlikon.ca]
Sent: Thursday, February 26, 2004 9:58 PM
Subject: RE: PCI daughter card with USB on a 405GP
You will need to apply the corresponding linuxppc patch
(/pub/linux/kernel/ports/ppc/2.4) to 2.4.22. The zvmlinux doesn't seem
to be built with only 2.4.22.
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2004-02-27 4:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-27 4:34 ADS860 - unable to load kernel- Bad magic number m.venkatraj
2004-02-27 4:45 ` John Zhou [this message]
2004-02-27 8:07 ` song sam
-- strict thread matches above, loose matches on Subject: below --
2004-02-27 9:14 m.venkatraj
2004-02-27 8:27 Demke, Torsten
[not found] <Iq959772845498.03218@webmail1.inner-21cn.com>
2004-02-26 17:24 ` Bob Beck
2004-02-27 16:32 ` Marius Groeger
2004-02-26 22:22 ` Bob Beck
2004-02-27 17:29 ` Marius Groeger
2004-02-26 22:38 ` Bob Beck
2004-02-27 19:32 ` Dan Malek
2004-02-27 1:32 ` Bob Beck
2004-02-27 21:05 ` Dan Malek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='001601c3fcec$7d5500b0$b702a8c0@newrock2' \
--to=zjzhou@newrocktech.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
--cc=m.venkatraj@exgate.tek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).