From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <001901c320c6$e8440090$6706a8c0@SPLENDOR> From: "Rupesh S" To: "linuxppc-embedded" References: <00512BA4F9D3D311912A009027E9B8F407E4F6@NT> Subject: Linux booting on FADS823 board Date: Thu, 22 May 2003 18:01:56 -0700 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi groups, I have a problem booting Linux with u-boot. Here are my configurations Processor -> MPC823 Board -> FADS823 Available RAM -> 0x000 to 0x 800000 Linux kernel Linked at -> 0x40000 mkimage on kernel done with Load address -> 0x40000 mkimage on kernel done with Entry point -> 0x4000c mkimage on RAMDISK done with Load Address -> 0x100000 mkimage on RAMDISK done with Entry point -> 0x100000 >>From u-boot command prompt, I do the following > tftpboot 40000 linux.img > tftpboot 100000 ramdisk.img > bootm 40000 100000 It says successful loading kernel , as well as RAMDISK. But after which, I do not get any further Linux banneers. In fact, the Linux kernel 's printfs aren't seen. I set the env variable bootargs as /dev/ram.. But in any case, only after the kernel boots up and the VFS is initialized, the Rootfs is going to come into picture, right ?? Any clues.... Rupesh ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/