* Interrupt mapping for MPC8323 board
@ 2009-03-12 3:38 Praveen VS
0 siblings, 0 replies; only message in thread
From: Praveen VS @ 2009-03-12 3:38 UTC (permalink / raw)
To: linuxppc-dev
[-- Attachment #1: Type: text/plain, Size: 923 bytes --]
We have a board similar to the MPC8323 rdb. In the board we have
connected the IDSEL to AD18 & we have only one minipci connector for it. We
have interfaced a Wlan Card . When we do
# lspci -x we get following
00:12.0 Network controller: RaLink RT2561/RT61 802.11g PCI
00: 14 18 01 03 07 00 10 04 00 00 80 02 08 80 00 00
10: 00 80 00 90 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 01 06 00 00 14 18 61 25
30: 00 00 00 00 40 00 00 00 00 00 00 00 13 01 00 00
In our circuit INTA is connected to IRQ4 . We are unable
to transmit thro this card. We are not getting any interrupts.We want to
make sure where to give the mapping of interrupts ?
how to give that for IDsel AD 18, INTA should be mapped to IRQ4 .
Is it that we need to change the dts file & create a new dtb? if so where to get exact meaning of how to configure "interrupt mapping" in the dts file
Regards
Praveen
[-- Attachment #2: Type: text/html, Size: 1602 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2009-03-12 3:55 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-12 3:38 Interrupt mapping for MPC8323 board Praveen VS
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).