>> emac: IBM EMAC Ethernet driver,
version
2.0
>> Maintained by Benjamin Herrenschmidt
<benh@kernel.crashing.org>
>> eth0: IBM ema c, MAC
00:00:00:00:00:00
>> eth0: Found Generic MII PHY
(0x00)
>> eth1: IBM emac, MAC
00:00:00:00:00:00
>> eth1: Found Generic MII PHY
(0x01)
Are you sure that you´ve configured your ethernet driver?
There is no MAC address defined. And the PHY address is really located
at 0x0 or 0x1? If not you have also to configure the offset from which address
the PHY routine start in your board specific files like for OCOTEA
reference board in
linux-2.6.12/arch/ppc/platforms/4xx/ocotea.c
Best regards,
David