* Query about Kernel Load address
@ 2008-03-10 13:13 Akhilesh Soni
0 siblings, 0 replies; only message in thread
From: Akhilesh Soni @ 2008-03-10 13:13 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 590 bytes --]
Hi,
I''ve ported u-boot-1.1.1 sucessfully on my IBM STBx25xx rewood6 platform (ppc405 core). Earlier in the ppcboot I used to load the zImage.treeboot directly via the bootloader and it used to relocate and run.
But with u-boot which image I should use and which address I should load the image. My board has 64 MB of RAM and out of which 32 MB is mapped at 0x0000000 and another 32MB is mapped at 0xA0000000. The U-boot code is located at 0x1fe2000 in RAM.
Also is there any 2.6 kernel source supporting redwood6 IBM STBx25xx platform.
Thanx in advance.
Regards,
Akhilesh
[-- Attachment #2: Type: text/html, Size: 1425 bytes --]
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2008-03-10 14:08 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-03-10 13:13 Query about Kernel Load address Akhilesh Soni
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).