From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <002401bfcd4f$01a738f0$4a1f76d8@washington>
From: "Navin Boppuri" <nboppuri@trinetcommunication.com>
To: <linuxppc-embedded@lists.linuxppc.org>
Subject: Help with an SPI driver
Date: Sat, 3 Jun 2000 12:29:40 +0100
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


Hello,

I have a custom board running an mpc823. It has uart connected to SMC1 which
runs just fine with the available driver. The other 3 uarts are connected to
the SPI controller. I am not an embedded engineer and have no experience
writing device drivers. I was wondering if somone can help me start off
writing one to make the 3 uarts works using the SPI

Thank you,
Navin

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/