From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <002501c3906c$91a87570$4a44900a@hydingnb> From: "hyding" To: "linuxppc-embedded" Cc: "Kerl, John" Subject: debug Montavista on ML300 Date: Sun, 12 Oct 2003 10:57:22 +0800 MIME-Version: 1.0 Content-Type: text/plain Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: hi, Maybe this is not the right place to ask questions. But i wish someone in this list will give me some help. Any hint will be appreciable. I am doing some work on ML300. After i generate the configuration file(top.bit), i don't know how to download the OS image to DDR SDRAM. Can i use the Parallel Cabel IV to download the OS image to DDR SDRAM? >>From some docs, i see the method to combine the configuration .bit file and OS image into a .ace file. Put the .ace into the CF card, the FPGA will be configured with this .ace after power. But how to make the .ace file including the .bit file and OS? Thanks! --- ding hou yong Nanjing Electrical Automation Institute Tel: 86-25-3429900-2425 GSM: 86-(0)13814021009 FAX: 86-25-3429900-2425 Email: nari_dhy@nari-china.com Http: www.nari-china.com --- ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/