PrPMC750 board supported?

PrPMC750 board supported?

[Toshimitsu Murakami]

Hello,

	I am porting Linux (2.2 or 2.4) to PrPMC750 board.
But the Linux cannot boot yet from Network boot.
Does anyone know how it can boot?

My environment is:
Kernel  MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
	Kernel 2.4.3-pre2
Moniter  PPCBug

Regards,

Toshi Murakami

[Fri, 09 Mar 2001 11:41:36 +0900]

^------------------------------------^
Toshimitsu Murakami   RealVision Inc.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

RE: PrPMC750 board supported?

[Stefano Coluccini]

> Hello,
>
> 	I am porting Linux (2.2 or 2.4) to PrPMC750 board.
> But the Linux cannot boot yet from Network boot.
> Does anyone know how it can boot?
>
> My environment is:
> Kernel  MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
> 	Kernel 2.4.3-pre2
> Moniter  PPCBug
>

The experimental 2_5 kernel at fsmlabs support the PrPMC750. I have not
tested it, but I'm working on a 'similar' board and it works fine.

Bye.

Stefano.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: PrPMC750 board supported?

[Toshimitsu Murakami]

Hi, Stefano,

	Thank you for information.
But I cannot find the 2_5 kernel of RTLinux at fsmlabs' ftp.
Can I use version 3.0 instead of 2_5?

Good day.

Toshi

Stefano Coluccini wrote on Fri, 9 Mar 2001 09:51:32 +0100
> > Hello,
> >
> > 	I am porting Linux (2.2 or 2.4) to PrPMC750 board.
> > But the Linux cannot boot yet from Network boot.
> > Does anyone know how it can boot?
> >
> > My environment is:
> > Kernel  MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
> > 	Kernel 2.4.3-pre2
> > Moniter  PPCBug
> >
>
> The experimental 2_5 kernel at fsmlabs support the PrPMC750. I have not
> tested it, but I'm working on a 'similar' board and it works fine.
>
> Bye.
>
> Stefano.
>

Toshi Murakami

[Fri, 09 Mar 2001 18:29:06 +0900]

^------------------------------------^
Toshimitsu Murakami   RealVision Inc.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

RE: PrPMC750 board supported?

[Stefano Coluccini]

> Hi, Stefano,
>
> 	Thank you for information.
> But I cannot find the 2_5 kernel of RTLinux at fsmlabs' ftp.
> Can I use version 3.0 instead of 2_5?

Excuse me, too brief in my precedent mail, you can download the 2_5 kernel
tree with bitkeeper connecting to the port 5005. You can find some hints at:
http://bitkeeper.fsmlabs.com/linuxppcbk.html

It is not the RTLinux kernel, it is the standard linuxppc kernel under
development.

Bye.
Stefano.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: PrPMC750 board supported?

[machael thailer]

Does you PvPMC750 board use powerpc 750 CPU?

Thank you very much.

machael thailer


----- Original Message -----
From: "Stefano Coluccini" <s.coluccini@caen.it>
To: "Toshimitsu Murakami" <murakami@realvision.co.jp>;
<linuxppc-embedded@lists.linuxppc.org>
Sent: Friday, March 09, 2001 4:51 PM
Subject: RE: PrPMC750 board supported?


>
> > Hello,
> >
> > I am porting Linux (2.2 or 2.4) to PrPMC750 board.
> > But the Linux cannot boot yet from Network boot.
> > Does anyone know how it can boot?
> >
> > My environment is:
> > Kernel  MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
> > Kernel 2.4.3-pre2
> > Moniter  PPCBug
> >
>
> The experimental 2_5 kernel at fsmlabs support the PrPMC750. I have not
> tested it, but I'm working on a 'similar' board and it works fine.
>
> Bye.
>
> Stefano.
>
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: PrPMC750 board supported?

[Karsten Jeppesen]

Our BriQs boots just fine over the network.

We are using Yaboot.

Then again - your platform, I think, is just a PREP while we have the
advantage of Open Firmware. I don't know if that makes a difference?



Sincerely,

Dr. Karsten Jeppesen
VP of Technology
Total Impact
<kj@totalimpact.com>
----------------------------------------------------------------------
"By the time they had diminished from 50 to 8, the other dwarves began
to suspect 'Hungry' ..."
        -- Gary Larson, "The Far Side"
----------------------------------------------------------------------


> From: "machael thailer" <dony.he@huawei.com>
> Date: Fri, 27 Apr 2001 16:01:13 +0800
> To: "Stefano Coluccini" <s.coluccini@caen.it>, "Toshimitsu Murakami"
> <murakami@realvision.co.jp>, <linuxppc-embedded@lists.linuxppc.org>
> Subject: Re: PrPMC750 board supported?
>
>
> Does you PvPMC750 board use powerpc 750 CPU?
>
> Thank you very much.
>
> machael thailer
>
>
> ----- Original Message -----
> From: "Stefano Coluccini" <s.coluccini@caen.it>
> To: "Toshimitsu Murakami" <murakami@realvision.co.jp>;
> <linuxppc-embedded@lists.linuxppc.org>
> Sent: Friday, March 09, 2001 4:51 PM
> Subject: RE: PrPMC750 board supported?
>
>
>>
>>> Hello,
>>>
>>> I am porting Linux (2.2 or 2.4) to PrPMC750 board.
>>> But the Linux cannot boot yet from Network boot.
>>> Does anyone know how it can boot?
>>>
>>> My environment is:
>>> Kernel  MontaVista CDK 1.2 (2.2.14 or 2.4-test2)
>>> Kernel 2.4.3-pre2
>>> Moniter  PPCBug
>>>
>>
>> The experimental 2_5 kernel at fsmlabs support the PrPMC750. I have not
>> tested it, but I'm working on a 'similar' board and it works fine.
>>
>> Bye.
>>
>> Stefano.
>>
>>
>>
>
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/