From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <002801c39153$f76fd3c0$2803050a@JackyLam> From: "Jacky Lam" To: References: <001d01c39133$20f088a0$2803050a@JackyLam> <5.1.0.14.2.20031012203903.02e546d8@mail.ebshome.net> Subject: Re: Walnut PCI bridge can't be detected Date: Mon, 13 Oct 2003 14:33:51 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="ISO-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: > Also, according to the log you posted bus enumeration was successful and > your device (es1371) was found. So I don't think you have a problem with a > bridge. > > FYI, bridge is not responsible for delivering IRQs from your card. IRQ > lines from the PCI slots are directly wired to the UIC (see > walnut::ppc405_map_irq for actual mapping). Yes, I know. Let me clarify my question again...Sorry for my blur question. What I mean is: Will there some miss configuration of bridge which will affect the behavior of PCI cards/slots? > > According to your log you have inserted card into the PCI slot 1, is this > correct ? > > If you still suspect that you have bridge problem, just insert some other > PCI card which is know to be supported by PPC kernel and see... Yes. Is there a list of popular PCI cards which are supported by PPC kernel directly without need of any modifications? Thanks. Regards, Jacky ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/