Marvell DB64360

Marvell DB64360

[Ing.Gianfranco Morandi (LAN)]

Hi to All,

I'm evaluating a new development based on PPC750FX and I would like to check
if there is some porting on the ELDK 3.0 package.
I have also verified what development board could be the best candidate to
be used as starting point and It seems to be the Marvell DB64360.

Did anybody work on such board?

and

Could anybody suggest me if there is some better reference point?

Many thanks in advance.

Gianfranco


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Marvell DB64360

[Mark A. Greer]

Ing.Gianfranco Morandi (LAN) wrote:

>I'm evaluating a new development based on PPC750FX and I would like to check
>if there is some porting on the ELDK 3.0 package.
>
I'll defer to Wolfgang on this one.

>I have also verified what development board could be the best candidate to
>be used as starting point and It seems to be the Marvell DB64360.
>
>Did anybody work on such board?
>
>and
>
>Could anybody suggest me if there is some better reference point?
>
>
There are several emails regarding this in the archives but basically,
right now the linux_2_4_galileo tree on source.mvista.com is the only
tree that I know of with 64360 support publicly available.  Note that
this is an old, dead tree.

I'm currently working on a merged pkg (64260/360/460) for the 2.6 tree
but its not ready.  I don't know if it will be worth back porting to 2.4
b/c that tree is pretty much locked down.

Mark


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Marvell DB64360

[Wolfgang Denk]

In message <404F421B.2000602@mvista.com> you wrote:
>
> >I'm evaluating a new development based on PPC750FX and I would like to check
> >if there is some porting on the ELDK 3.0 package.
> >
> I'll defer to Wolfgang on this one.

I have little to contribute here. The ELDK is just a toolbox. You can
use it to build code for any board.


Best regards,

Wolfgang Denk

--
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
"Today's robots are very primitive, capable of understanding  only  a
few  simple  instructions  such  as 'go left', 'go right', and 'build
car'."                                                  - John Sladek

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Marvell DB64360

[Ing.Gianfranco Morandi (LAN)]

Many thanks for the suggestions. Your experience would be absolutely useful.

Regards

Gianfranco

----- Original Message -----
From: "Wolfgang Denk" <wd@denx.de>
To: "Mark A. Greer" <mgreer@mvista.com>
Cc: "Ing.Gianfranco Morandi (LAN)" <gianfranco.morandi@euro-studio.it>;
"LinuxPPC" <linuxppc-embedded@lists.linuxppc.org>
Sent: Wednesday, March 10, 2004 5:37 PM
Subject: Re: Marvell DB64360


> In message <404F421B.2000602@mvista.com> you wrote:
> >
> > >I'm evaluating a new development based on PPC750FX and I would like to
check
> > >if there is some porting on the ELDK 3.0 package.
> > >
> > I'll defer to Wolfgang on this one.
>
> I have little to contribute here. The ELDK is just a toolbox. You can
> use it to build code for any board.
>
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
> "Today's robots are very primitive, capable of understanding  only  a
> few  simple  instructions  such  as 'go left', 'go right', and 'build
> car'."                                                  - John Sladek
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: Marvell DB64360

[Stuart Yoder]

IBM has a 750FX eval board with the Marvel 64360 on it.

http://www-306.ibm.com/chips/techlib/techlib.nsf/products/PowerPC_750FX_Evaluation_Kit

Stuart

----- Original Message -----
From: "Ing.Gianfranco Morandi (LAN)" <gianfranco.morandi@euro-studio.it>
To: "LinuxPPC" <linuxppc-embedded@lists.linuxppc.org>
Sent: Wednesday, March 10, 2004 5:24 AM
Subject: Marvell DB64360


>
> Hi to All,
>
> I'm evaluating a new development based on PPC750FX and I would like to
check
> if there is some porting on the ELDK 3.0 package.
> I have also verified what development board could be the best candidate to
> be used as starting point and It seems to be the Marvell DB64360.
>
> Did anybody work on such board?
>
> and
>
> Could anybody suggest me if there is some better reference point?
>
> Many thanks in advance.
>
> Gianfranco
>
>
>
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/