ethernet patch for kernel 2.6 for ml403

ethernet patch for kernel 2.6 for ml403

[Aleck Lin]

Hello,

I found this patch that was posted back in January
(http://ozlabs.org/pipermail/linuxppc-embedded/2006-January/021574.html).

As I was trying it, there were some warnings and errors. When I fixed them
as much as I could to the point of a successful compilation, I tried to boot
this kernel image on ml403. However, it still complains that no network
devices available. 

TWO questions.
1. Has anyone ever tried with the patch and been successful with it?
2. Why does it still complain no network devices found even though I thot I
added the correct ethernet driver? 

Thanks for any help as I'm still relatively new to this.

Aleck


Here's my booting message.

---------------------------------------------------
## Booting image at 00800000 ...
   Image Name:   Linux-2.6.17.8
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    854118 Bytes = 834.1 kB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## cmdline at 0x007FFF00 ... 0x007FFF37
memstart    = 0x00000000
memsize     = 0x04000000
flashstart  = 0xFF800000
flashsize   = 0x00800000
flashoffset = 0x00000000
sramstart   = 0x00000000
sramsize    = 0x00000000
bootflags   = 0x0000012A
procfreq    =    300 MHz
plb_busfreq =    100 MHz
ethaddr     = 00:11:22:33:44:55
IP addr     = 192.168.200.230
baudrate    =   9600 bps
## Loading RAMDisk Image at 01000000 ...
   Image Name:   Simple Embedded Linux Framework
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    1437217 Bytes =  1.4 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 03d03000, end 03e61e21 ... OK
[    0.000000] Linux version 2.6.17.8 (aleck@sac.gdatech.com) (gcc version
4.0.0 (DENX ELDK 4.0 4.0.0)) #87 Thu Sep 14 20:06:23 PDT 2006
[    0.000000] Xilinx ML403 Reference System (Virtex-4 FX)
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: console=ttyS0,9600 ip=192.168.200.230
root=/dev/ram0 rw
[    0.000000] Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000
[    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
[    0.000151] Console: colour dummy device 80x25
[    0.000567] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.001213] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.013282] Memory: 61632k available (1308k kernel code, 476k data, 84k
init, 0k highmem)
[    0.200420] Mount-cache hash table entries: 512
[    0.202863] checking if image is initramfs...it isn't (no cpio magic);
looks like an initrd
[    0.863139] Freeing initrd memory: 1403k freed
[    0.866364] NET: Registered protocol family 16
[    0.869487] Generic PHY: Registered new driver
[    0.874412] NET: Registered protocol family 2
[    0.912357] IP route cache hash table entries: 512 (order: -1, 2048
bytes)
[    0.913062] TCP established hash table entries: 2048 (order: 1, 8192
bytes)
[    0.913241] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.913339] TCP: Hash tables configured (established 2048 bind 1024)
[    0.913368] TCP reno registered
[    0.920012] io scheduler noop registered
[    0.920111] io scheduler anticipatory registered (default)
[    0.920187] io scheduler deadline registered
[    0.920346] io scheduler cfq registered
[    0.958113] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing disabled
[    0.962450] serial8250.0: ttyS0 at MMIO 0x40401003 (irq = 3) is a 16550A
[    2.871187] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[    2.961972] allocating ethernet device...
[    3.010204] eth%d: using fifo mode.
[    3.052064] eth%d: Xilinx EMAC #0 at 0x80400000 mapped to 0xC5000000,
irq=31
[    3.136606] eth%d: id 2.0a; block id 0, type 8
[    3.190431] Marvell 88E1101: Registered new driver
[    3.250101] tun: Universal TUN/TAP device driver, 1.6
[    3.310712] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    3.385845] mice: PS/2 mouse device common for all mice
[    3.448583] TCP bic registered
[    3.485307] NET: Registered protocol family 1
[    3.537610] NET: Registered protocol family 17
[    4.096219] IP-Config: No network devices available.
[    4.156871] RAMDISK: Compressed image found at block 0
[    5.002841] VFS: Mounted root (ext2 filesystem).
[    5.058432] Freeing unused kernel memory: 84k init
### Application running ...


BusyBox v(null) ((null)) Built-in shell (msh)
#
------------------------------------------------------------------

Re: ethernet patch for kernel 2.6 for ml403

[David H. Lynch Jr.]

    I have used a later version of what I beleive is the same patch.
            http://source.mvista.com/~ank/paulus-powerpc/20060309/

    This is for the PLB TEMAC. My guess based on your capture below is 
that you are using that IP.
  
    Did you try ifconfig eth0 xxx.xxx.xxx.xxx ?
    I do not know what is in the rest of your init setup but something 
must asign the IP and bring up the interface.
   


   


Aleck Lin wrote:
> Hello,
>
> I found this patch that was posted back in January
> (http://ozlabs.org/pipermail/linuxppc-embedded/2006-January/021574.html).
>
> As I was trying it, there were some warnings and errors. When I fixed them
> as much as I could to the point of a successful compilation, I tried to boot
> this kernel image on ml403. However, it still complains that no network
> devices available. 
>
> TWO questions.
> 1. Has anyone ever tried with the patch and been successful with it?
> 2. Why does it still complain no network devices found even though I thot I
> added the correct ethernet driver? 
>
> Thanks for any help as I'm still relatively new to this.
>
> Aleck
>
>
> Here's my booting message.
>
> ---------------------------------------------------
> ## Booting image at 00800000 ...
>    Image Name:   Linux-2.6.17.8
>    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>    Data Size:    854118 Bytes = 834.1 kB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
> ## cmdline at 0x007FFF00 ... 0x007FFF37
> memstart    = 0x00000000
> memsize     = 0x04000000
> flashstart  = 0xFF800000
> flashsize   = 0x00800000
> flashoffset = 0x00000000
> sramstart   = 0x00000000
> sramsize    = 0x00000000
> bootflags   = 0x0000012A
> procfreq    =    300 MHz
> plb_busfreq =    100 MHz
> ethaddr     = 00:11:22:33:44:55
> IP addr     = 192.168.200.230
> baudrate    =   9600 bps
> ## Loading RAMDisk Image at 01000000 ...
>    Image Name:   Simple Embedded Linux Framework
>    Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
>    Data Size:    1437217 Bytes =  1.4 MB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    Loading Ramdisk to 03d03000, end 03e61e21 ... OK
> [    0.000000] Linux version 2.6.17.8 (aleck@sac.gdatech.com) (gcc version
> 4.0.0 (DENX ELDK 4.0 4.0.0)) #87 Thu Sep 14 20:06:23 PDT 2006
> [    0.000000] Xilinx ML403 Reference System (Virtex-4 FX)
> [    0.000000] Built 1 zonelists
> [    0.000000] Kernel command line: console=ttyS0,9600 ip=192.168.200.230
> root=/dev/ram0 rw
> [    0.000000] Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000
> [    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
> [    0.000151] Console: colour dummy device 80x25
> [    0.000567] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
> [    0.001213] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
> [    0.013282] Memory: 61632k available (1308k kernel code, 476k data, 84k
> init, 0k highmem)
> [    0.200420] Mount-cache hash table entries: 512
> [    0.202863] checking if image is initramfs...it isn't (no cpio magic);
> looks like an initrd
> [    0.863139] Freeing initrd memory: 1403k freed
> [    0.866364] NET: Registered protocol family 16
> [    0.869487] Generic PHY: Registered new driver
> [    0.874412] NET: Registered protocol family 2
> [    0.912357] IP route cache hash table entries: 512 (order: -1, 2048
> bytes)
> [    0.913062] TCP established hash table entries: 2048 (order: 1, 8192
> bytes)
> [    0.913241] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
> [    0.913339] TCP: Hash tables configured (established 2048 bind 1024)
> [    0.913368] TCP reno registered
> [    0.920012] io scheduler noop registered
> [    0.920111] io scheduler anticipatory registered (default)
> [    0.920187] io scheduler deadline registered
> [    0.920346] io scheduler cfq registered
> [    0.958113] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing disabled
> [    0.962450] serial8250.0: ttyS0 at MMIO 0x40401003 (irq = 3) is a 16550A
> [    2.871187] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
> blocksize
> [    2.961972] allocating ethernet device...
> [    3.010204] eth%d: using fifo mode.
> [    3.052064] eth%d: Xilinx EMAC #0 at 0x80400000 mapped to 0xC5000000,
> irq=31
> [    3.136606] eth%d: id 2.0a; block id 0, type 8
> [    3.190431] Marvell 88E1101: Registered new driver
> [    3.250101] tun: Universal TUN/TAP device driver, 1.6
> [    3.310712] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [    3.385845] mice: PS/2 mouse device common for all mice
> [    3.448583] TCP bic registered
> [    3.485307] NET: Registered protocol family 1
> [    3.537610] NET: Registered protocol family 17
> [    4.096219] IP-Config: No network devices available.
> [    4.156871] RAMDISK: Compressed image found at block 0
> [    5.002841] VFS: Mounted root (ext2 filesystem).
> [    5.058432] Freeing unused kernel memory: 84k init
> ### Application running ...
>
>
> BusyBox v(null) ((null)) Built-in shell (msh)
> #
> ------------------------------------------------------------------
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>   


-- 
Dave Lynch 					  	    DLA Systems
Software Development:  				         Embedded Linux
717.627.3770 	       dhlii@dlasys.net 	  http://www.dlasys.net
fax: 1.253.369.9244 			           Cell: 1.717.587.7774
Over 25 years' experience in platforms, languages, and technologies too numerous to list.

"Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction."
Albert Einstein

RE: ethernet patch for kernel 2.6 for ml403

[Aleck Lin]

David,

I believe I'm using plb_emac. Is it correct that I'm looking for the
Xilinx_enet driver patch?? 

I tried ifconfig, but no luck.

------------------------------------------
#ifconfig eth0 address 192.168.200.230
SIOCSIFADDR: No such device
#
-------------------------------------------

Thanks

Aleck


-----Original Message-----
From: David H. Lynch Jr. [mailto:dhlii@dlasys.net] 
Sent: Friday, September 15, 2006 4:17 AM
To: Aleck Lin
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: ethernet patch for kernel 2.6 for ml403

    I have used a later version of what I beleive is the same patch.
            http://source.mvista.com/~ank/paulus-powerpc/20060309/

    This is for the PLB TEMAC. My guess based on your capture below is 
that you are using that IP.
  
    Did you try ifconfig eth0 xxx.xxx.xxx.xxx ?
    I do not know what is in the rest of your init setup but something 
must asign the IP and bring up the interface.
   


   


Aleck Lin wrote:
> Hello,
>
> I found this patch that was posted back in January
> (http://ozlabs.org/pipermail/linuxppc-embedded/2006-January/021574.html).
>
> As I was trying it, there were some warnings and errors. When I fixed them
> as much as I could to the point of a successful compilation, I tried to
boot
> this kernel image on ml403. However, it still complains that no network
> devices available. 
>
> TWO questions.
> 1. Has anyone ever tried with the patch and been successful with it?
> 2. Why does it still complain no network devices found even though I thot
I
> added the correct ethernet driver? 
>
> Thanks for any help as I'm still relatively new to this.
>
> Aleck
>
>
> Here's my booting message.
>
> ---------------------------------------------------
> ## Booting image at 00800000 ...
>    Image Name:   Linux-2.6.17.8
>    Image Type:   PowerPC Linux Kernel Image (gzip compressed)
>    Data Size:    854118 Bytes = 834.1 kB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    Uncompressing Kernel Image ... OK
> ## cmdline at 0x007FFF00 ... 0x007FFF37
> memstart    = 0x00000000
> memsize     = 0x04000000
> flashstart  = 0xFF800000
> flashsize   = 0x00800000
> flashoffset = 0x00000000
> sramstart   = 0x00000000
> sramsize    = 0x00000000
> bootflags   = 0x0000012A
> procfreq    =    300 MHz
> plb_busfreq =    100 MHz
> ethaddr     = 00:11:22:33:44:55
> IP addr     = 192.168.200.230
> baudrate    =   9600 bps
> ## Loading RAMDisk Image at 01000000 ...
>    Image Name:   Simple Embedded Linux Framework
>    Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
>    Data Size:    1437217 Bytes =  1.4 MB
>    Load Address: 00000000
>    Entry Point:  00000000
>    Verifying Checksum ... OK
>    Loading Ramdisk to 03d03000, end 03e61e21 ... OK
> [    0.000000] Linux version 2.6.17.8 (aleck@sac.gdatech.com) (gcc version
> 4.0.0 (DENX ELDK 4.0 4.0.0)) #87 Thu Sep 14 20:06:23 PDT 2006
> [    0.000000] Xilinx ML403 Reference System (Virtex-4 FX)
> [    0.000000] Built 1 zonelists
> [    0.000000] Kernel command line: console=ttyS0,9600 ip=192.168.200.230
> root=/dev/ram0 rw
> [    0.000000] Xilinx INTC #0 at 0x41200000 mapped to 0xFDFFE000
> [    0.000000] PID hash table entries: 512 (order: 9, 2048 bytes)
> [    0.000151] Console: colour dummy device 80x25
> [    0.000567] Dentry cache hash table entries: 8192 (order: 3, 32768
bytes)
> [    0.001213] Inode-cache hash table entries: 4096 (order: 2, 16384
bytes)
> [    0.013282] Memory: 61632k available (1308k kernel code, 476k data, 84k
> init, 0k highmem)
> [    0.200420] Mount-cache hash table entries: 512
> [    0.202863] checking if image is initramfs...it isn't (no cpio magic);
> looks like an initrd
> [    0.863139] Freeing initrd memory: 1403k freed
> [    0.866364] NET: Registered protocol family 16
> [    0.869487] Generic PHY: Registered new driver
> [    0.874412] NET: Registered protocol family 2
> [    0.912357] IP route cache hash table entries: 512 (order: -1, 2048
> bytes)
> [    0.913062] TCP established hash table entries: 2048 (order: 1, 8192
> bytes)
> [    0.913241] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
> [    0.913339] TCP: Hash tables configured (established 2048 bind 1024)
> [    0.913368] TCP reno registered
> [    0.920012] io scheduler noop registered
> [    0.920111] io scheduler anticipatory registered (default)
> [    0.920187] io scheduler deadline registered
> [    0.920346] io scheduler cfq registered
> [    0.958113] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
> sharing disabled
> [    0.962450] serial8250.0: ttyS0 at MMIO 0x40401003 (irq = 3) is a
16550A
> [    2.871187] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024
> blocksize
> [    2.961972] allocating ethernet device...
> [    3.010204] eth%d: using fifo mode.
> [    3.052064] eth%d: Xilinx EMAC #0 at 0x80400000 mapped to 0xC5000000,
> irq=31
> [    3.136606] eth%d: id 2.0a; block id 0, type 8
> [    3.190431] Marvell 88E1101: Registered new driver
> [    3.250101] tun: Universal TUN/TAP device driver, 1.6
> [    3.310712] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
> [    3.385845] mice: PS/2 mouse device common for all mice
> [    3.448583] TCP bic registered
> [    3.485307] NET: Registered protocol family 1
> [    3.537610] NET: Registered protocol family 17
> [    4.096219] IP-Config: No network devices available.
> [    4.156871] RAMDISK: Compressed image found at block 0
> [    5.002841] VFS: Mounted root (ext2 filesystem).
> [    5.058432] Freeing unused kernel memory: 84k init
> ### Application running ...
>
>
> BusyBox v(null) ((null)) Built-in shell (msh)
> #
> ------------------------------------------------------------------
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs.org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
>   


-- 
Dave Lynch 					  	    DLA Systems
Software Development:  				         Embedded Linux
717.627.3770 	       dhlii@dlasys.net 	  http://www.dlasys.net
fax: 1.253.369.9244 			           Cell: 1.717.587.7774
Over 25 years' experience in platforms, languages, and technologies too
numerous to list.

"Any intelligent fool can make things bigger and more complex... It takes a
touch of genius - and a lot of courage to move in the opposite direction."
Albert Einstein