From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Message-ID: <003801c4d885$62ffd580$0301a8c0@chuck2> From: "Mark Chambers" To: =?ks_c_5601-1987?B?seggw6K9xA==?= , References: <20041202111332.41ae7a4c000d614500056bfc.1632@empal.com> Date: Thu, 2 Dec 2004 10:41:17 -0500 MIME-Version: 1.0 Content-Type: text/plain; charset="ks_c_5601-1987" Subject: Re: [micropatch]mpc852t List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , I have an 852t board with 2.4.19 running. It uses smc1, scc3 and scc4. I used a stock configuration so that smc2 comes up as though it were present and is tts/1. But I made no modifications to the kernel and there were no conflicts. Are you trying to use a microcode patch? If so, tell us which one(s) The whole 8xx microcode patch issue went through a big discussion a couple of months ago. Mark Chambers wvcomputronics.com ----- Original Message ----- From: ±è â½Ä To: Linuxppc-embedded@ozlabs.org Sent: Wednesday, December 01, 2004 9:13 PM Subject: [micropatch]mpc852t I use proting linux2.4.18 in mpc852t. I found overlay smc1 and scc3 in dpram paramater. I try to micropatch mpc852t. but it didn't Let's me know how to use micropatch. Thank you for reading a mail. from cs. kim. _______________________________________________ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded