From: "yang" <wchyang_hn@sina.com>
To: <linuxppc-embedded@lists.linuxppc.org>, <wchyang_hn@sina.com>
Subject: Problem of linux's kernel booting
Date: Thu, 5 Feb 2004 09:31:42 +0800 [thread overview]
Message-ID: <004101c3eb87$d2cdf090$5e1312ac@yang> (raw)
Hello,
I encounter a problem when booting linux 2.2.4 kernel on FADS860T board by ppcboot-2.0.
After mounting NFS filesystem on my host, the follow message was printed in console:
## Booting image at ffe80000 ...
Image Name: Linux-2.4.4
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 457580 Bytes = 446.9 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.4 (yang@vlinux) (gcc version 2.95.3 20010315 (release/MontaVis
ta)) #12 Tue Feb 3 19:37:20 CST 2004
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw nfsroot=172.18.19.254:/opt/nfsfilesystem/
ip=172.18.19.253:172.18.19.254:172.18.19.1:255.255.255.0:vmlinux::off
Decrementer Frequency: 3125000
Warning: real time clock seems stuck!
Calibrating delay loop... 49.86 BogoMIPS
Memory: 30868k available (920k kernel code, 336k data, 44k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS0 on SMC1 at 0x0280, BRG1
ttyS1 on SMC2 at 0x0380, BRG2
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20440kB/6813kB, 64 slots per queue
eth0: CPM ENET Version 0.2 on SCC1, 44:00:00:00:00:00
CFI: Found no TQM8xxL Bank 0 device at location zero
CFI: Found no TQM8xxL Bank 1 device at location zero
CFI: Found no TQM8xxL Bank 2 device at location zero
CFI: Found no TQM8xxL Bank 3 device at location zero
TQM8xxL: No support flash chips found!
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 172.18.19.254
Looking up port of RPC 100005/2 on 172.18.19.254
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 44k init
Kernel panic: No init found. Try passing init= option to kernel.
Rebooting in 180 seconds..
Would you like to tell me how to make NFS filesystem on my host, especialy how to config the init options of kenel? Thank you very much!
Best regards,
yang
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next reply other threads:[~2004-02-05 1:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-02-05 1:31 yang [this message]
2004-02-05 8:25 ` Problem of linux's kernel booting Wolfgang Denk
2004-02-05 11:17 ` James Bates
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='004101c3eb87$d2cdf090$5e1312ac@yang' \
--to=wchyang_hn@sina.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).