* ramdisk loading address in U-Boot
@ 2005-12-20 1:45 HappyPhot
0 siblings, 0 replies; only message in thread
From: HappyPhot @ 2005-12-20 1:45 UTC (permalink / raw)
To: linuxppc-embedded
Hi:
I build a ramdisk image and mkimage for U-Boot
by using -a and -e = 4000000.
In U-Boot command line, I type "tftpboot 2000000 ramdisk_image".
After bootm , the ramdisk is loaded to "0fdea000", like:
## initrd at 0x02000040 ... 0x02185BD0 (len=1596305=0x185B91)
Loading Ramdisk to 0fdea000, end 0ff6fb91 ... OK
## Transferring control to Linux ....
Why was the ramdisk loaded into 0fdea000, instead of 4000000 ?
thank you,
/HappyPhot
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2005-12-20 1:45 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-12-20 1:45 ramdisk loading address in U-Boot HappyPhot
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).