From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <004501c0b5cf$6ebcd260$ee0fa8c0@mystore> Reply-To: "Jari Nguyen Trung Thanh" From: "Jari Nguyen Trung Thanh" To: "Zheng, Haifei" , Cc: References: <5D2136DF3DD5D311AE89009027C67FB003138BA8@fmsmsx96.fm.intel.com> Subject: Re: initrd problems on CLLF860T, please help. Date: Mon, 26 Mar 2001 16:33:28 +0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: pls make sure you have the link in /opt/hardhat/devkit/ppc/8xx/powerpc-hardhat- linux -> / you can check it in the past mailling list hope this help, Jari ----- Original Message ----- From: "Zheng, Haifei" To: Cc: Sent: Thursday, February 15, 2001 3:00 AM Subject: initrd problems on CLLF860T, please help. > > Hi there, > > We are trying to boot our CLLF860T board with an initrd. We are using Monta > Vista Hard Hat (kernel 2.2.14) and we built out own ramdisk image. ( I know > there is an example ramdisk.image.gz from Hard Hat but haven't found it) and > we are getting the following boot messages: > > Load menu: press 123456789T key : : T > target IP address : 0A14140A > target file name : current-initrd > address bias : 0 > Starting tftp download: > inetARP(): OK > .1.2.4.8.16.32.64.128.256.512.1024.2048.4096.8192.16384 > load_tftp(): OK > 1359955 data bytes, 17216 S-records, 2657 tftp blocks, 0 repeated blocks > start address = 00200000 > load_tftp_toMem(): OK > Transferring control to downloaded program > loaded at: 00200000 0020C580 > relocated to: 00180000 0018C580 > board data at: 001801C8 001801E4 > relocated to: 00200100 0020011C > zimage at: 00207000 0026CB2E > initrd at: 0026CB2E 00285258 > avail ram: 00286000 01000000 > > Linux/PPC load: root=/dev/ram > misc.c > Uncompressing Linux...done. > Now booting the kernel > Linux version 2.2.14 (root@shark) (gcc version 2.95.2 19991030 (2.95.3 > prereleas > e/franzo)) #541 Wed Feb 14 09:57:22 PST 2001 > m8xx_setup.c:92: Boot arguments: root=/dev/ram > initrd memory block starts: c026cb2e ends c0285258 > time_init: decrementer frequency = 180000000/60 > Calibrating delay loop... 47.82 BogoMIPS > Memory: 15028k available (748k kernel code, 464k data, 40k init) > [c0000000,c1000 > 000] > Dentry hash table entries: 2048 (order 2, 16k) > Buffer cache hash table entries: 16384 (order 4, 64k) > Page cache hash table entries: 4096 (order 2, 16k) > POSIX conformance testing by UNIFIX > Linux NET4.0 for Linux 2.2 > Based upon Swansea University Computer Society NET3.039 > NET4: Unix domain sockets 1.0 for Linux NET4.0. > NET4: Linux TCP/IP 1.0 for NET4.0 > IP Protocols: ICMP, UDP, TCP > TCP: Hash tables configured (ehash 16384 bhash 16384) > Initializing RT netlink socket > Starting kswapd v 1.5 > CPM UART driver version 0.03 > ttyS00 at 0x0280 is a SMC > ttyS01 at 0x0380 is a SMC > ttyS02 at 0x0100 is a SCC > ttyS03 at 0x0200 is a SCC > pty: 256 Unix98 ptys configured > RAM disk driver initialized: 16 RAM disks of 4096K size > loop: registered device at major 7 > eth0: CPM ENET Version 0.2, 00:10:ec:00:1a:0f > CONFIG_RPXCLASSIC > The FEC Ethernet specific entries in the device structure... > eth1: FEC ENET Version 0.2, 00:10:ec:80:1a:0f > fec: Phy @ 0x0, type LXT971 (0x001378e2) > fec: link up, 100 Mbps, full-duplex, auto complete > PPP: version 2.3.7 (demand dialling) > TCP compression code copyright 1989 Regents of the University of California > PPP line discipline registered. > Sending BOOTP requests.... OK > IP-Config: Got BOOTP answer from 10.20.20.10, my address is 10.20.20.11 > RAMDISK: Compressed image found at block 0 > VFS: Mounted root (romfs filesystem). > Freeing unused kernel memory: 40k int > Kernel panic: No init found. Try passing init= option to kernel. > Rebooting in 180 seconds.. > > Any help will be high appreciated. > > Haifei > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/