linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Tameen Khan" <tameen@cisco.com>
To: "'Embedded Linux PPC list'" <linuxppc-embedded@lists.linuxppc.org>
Subject: Kgdb on Motorola 8451 ppc board
Date: Tue, 29 Jun 2004 10:56:25 -0700	[thread overview]
Message-ID: <004501c45e02$65a90de0$273147ab@amer.cisco.com> (raw)
In-Reply-To: <Pine.LNX.4.60.0406291107530.25353@localhost.localdomain>


I'm trying to run kgdb on  Motorola 8451 ppc board.
I've compiled the kernel with the CONFIG_KGDB option.
The test machine is a linux host. I'm using gdb compiled for target ppc
architecture. When I try to connect to the dev machine from the test
machine, I get the following error.

(gdb) set remotebaud 9600
(gdb) target remote /dev/ttyS1
Remote debugging using /dev/ttyS1
^^
^^^^Ignoring packet error, continuing...
^^^Ignoring packet error, continuing...
Ignoring packet error, continuing...
Ignoring packet error, continuing...
Couldn't establish connection to remote target
Malformed response to offset query, timeout
(gdb)

I've tried other baudrates, but get the same error with them. Any pointers
to where I can get info to get kgdb working for this cross arch debugging
will be helpful.. So far I've searched the web without much luck on this
topic.

Thanks
-Tameen


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

  reply	other threads:[~2004-06-29 17:56 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-06-29 15:12 ok ... which source trees are the "right" choices? Robert P. J. Day
2004-06-29 17:56 ` Tameen Khan [this message]
2004-06-29 19:59 ` Tom Rini
  -- strict thread matches above, loose matches on Subject: below --
2004-06-29 17:54 Kgdb on Motorola 8451 ppc board Tameen Khan
2004-06-29 18:21 Tameen Khan
2004-06-30  9:25 Yuri Frolov
2004-06-30  9:28 Yuri Frolov
2004-07-06  4:39 Swarthout Ed-RA8734

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='004501c45e02$65a90de0$273147ab@amer.cisco.com' \
    --to=tameen@cisco.com \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).