* Shell prompt - Command not visible
@ 2003-04-28 18:57 Aman
2003-04-29 11:51 ` Shell prompt - Problem Solved Aman
0 siblings, 1 reply; 2+ messages in thread
From: Aman @ 2003-04-28 18:57 UTC (permalink / raw)
To: linuxppc embedded
Hi All
To enable/ disable the shell prompt in linuxppc for IBM 440GP, I wrote two
script files. They are as follows
/**********************************************************************/
/* enable_cli.sh: This script is to enable the shell prompt */
grep -v 'sh:123:respawn:/bin/sh < /dev/console > /dev/console 2>
/dev/console' /etc/inittab > inittab.tmp
echo 'sh:123:respawn:/bin/sh < /dev/console > /dev/console 2> /dev/console'
>> inittab.tmp
mv inittab.tmp /etc/inittab
init q
/**********************************************************************/
/*disable_cli.sh: This script is to disable the shell prompt */
grep -v 'sh:123:respawn:/bin/sh < /dev/console > /dev/console 2>
/dev/console' /etc/inittab > inittab.tmp
mv inittab.tmp /etc/inittab
init q
/**********************************************************************/
To enable shell prompt , I give the command "sh enable_cli.sh, to disable
the shell prompt "sh disable_cli.sh"
First time things work fine ie enable/disable shell prompt.When enabled, in
the shell prompt I can execute the command from the shell prompt. If I
disable the shell prompt and enable for the second time, I get the prompt
and I can execute command in the prompt, however the commands I type on the
prompt is not visible.
I type the enter key continuously I get the shell prompt like this
sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a#
sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a#
sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a#
sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a#
Can anybody help me in solving this issue
Regards
Aman
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Shell prompt - Problem Solved
2003-04-28 18:57 Shell prompt - Command not visible Aman
@ 2003-04-29 11:51 ` Aman
0 siblings, 0 replies; 2+ messages in thread
From: Aman @ 2003-04-29 11:51 UTC (permalink / raw)
To: Aman, linuxppc embedded
Hi All
The echoing of received characters got disabled, when I disable the shell
prompt. I used the command "stty echo -F /dev/ttyS0" to enable the echo of
the received characters
Regards
Aman
----- Original Message -----
From: "Aman" <aman@mistralsoftware.com>
To: "linuxppc embedded" <linuxppc-embedded@lists.linuxppc.org>
Sent: Tuesday, April 29, 2003 12:27 AM
Subject: Shell prompt - Command not visible
>
> Hi All
>
> To enable/ disable the shell prompt in linuxppc for IBM 440GP, I wrote two
> script files. They are as follows
>
> /**********************************************************************/
> /* enable_cli.sh: This script is to enable the shell prompt */
>
> grep -v 'sh:123:respawn:/bin/sh < /dev/console > /dev/console 2>
> /dev/console' /etc/inittab > inittab.tmp
> echo 'sh:123:respawn:/bin/sh < /dev/console > /dev/console 2>
/dev/console'
> >> inittab.tmp
> mv inittab.tmp /etc/inittab
> init q
> /**********************************************************************/
> /*disable_cli.sh: This script is to disable the shell prompt */
>
> grep -v 'sh:123:respawn:/bin/sh < /dev/console > /dev/console 2>
> /dev/console' /etc/inittab > inittab.tmp
> mv inittab.tmp /etc/inittab
> init q
> /**********************************************************************/
>
> To enable shell prompt , I give the command "sh enable_cli.sh, to disable
> the shell prompt "sh disable_cli.sh"
>
> First time things work fine ie enable/disable shell prompt.When enabled,
in
> the shell prompt I can execute the command from the shell prompt. If I
> disable the shell prompt and enable for the second time, I get the prompt
> and I can execute command in the prompt, however the commands I type on
the
> prompt is not visible.
> I type the enter key continuously I get the shell prompt like this
> sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a#
sh-2.05a#
> sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a#
> sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a#
> sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a# sh-2.05a#
>
> Can anybody help me in solving this issue
>
> Regards
> Aman
>
>
>
>
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-04-29 11:51 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-04-28 18:57 Shell prompt - Command not visible Aman
2003-04-29 11:51 ` Shell prompt - Problem Solved Aman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).