RE: emac driver broken in 2.6.12.2 ?

["Peter Fercher" <peter.fercher@scs.ch>]

hi,

when you read the output I have pasted there you can see the following =
(also
in my origninal mail)
eth0: IBM emac, MAC 00:00:00:00:00:00

eth0: Found Generic MII PHY (0x00)

eth1: IBM emac, MAC 00:00:00:00:00:00

eth1: Found Generic MII PHY (0x01)


I think that this MAC addresses are crap (sorry if not formulated =
clearly
enough for you ;)
am I wrong ?

cheers, peter

> -----Original Message-----
> From: Josh Boyer [mailto:jwboyer@jdub.homelinux.org]=20
> Sent: Montag, 19. September 2005 15:42
> To: Peter Fercher
> Cc: benh@kernel.crashing.org; linux-ppc-embedded
> Subject: Re: emac driver broken in 2.6.12.2 ?
>=20
>=20
> On Mon, 2005-09-19 at 15:37 +0200, Peter Fercher wrote:
> > hi,
> > =20
> > i have problems with the IBM EMAC with 2.6.12.2 (the driver worked=20
> > with 2.4.25) running on ppc405EP octobus board. Cross=20
> compiled on x86=20
> > using the eldk-3.1 toolchain
> > =20
> > any hints ?
>=20
> I think you'd need to be more explicit about what "problems"=20
> means. Hard to give hints with what you have here.
>=20
> josh
>=20
>=20
>=20

hi,
=20
i have problems with the IBM EMAC with 2.6.12.2 (the driver worked with
2.4.25)
running on ppc405EP octobus board. Cross compiled on x86 using the =
eldk-3.1
toolchain
=20
any hints ?
=20
emac: IBM EMAC Ethernet driver, version 2.0

Maintained by Benjamin Herrenschmidt <benh@kernel.crashing.org>

eth0: IBM emac, MAC 00:00:00:00:00:00

eth0: Found Generic MII PHY (0x00)

eth1: IBM emac, MAC 00:00:00:00:00:00

eth1: Found Generic MII PHY (0x01)

=20
cheers, peter
---------------------------------------------------------
Supercomputing Systems AG    phone:  +41 (0)43 456 16 31
Peter Fercher                fax:    +41 (0)43 456 16 10
Technoparkstrasse 1          email:  peter.fercher@scs.ch
CH-8005 Zuerich              url:    http://www.scs.ch=20
---------------------------------------------------------
 =20