From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <005b01bff72a$dc426890$a66d34c0@oleane.com> From: "Lionel TAILLURAT" To: "ppc_mailing_list" Subject: -= MVME 2300 boot args=- Date: Wed, 26 Jul 2000 19:56:40 +0200 MIME-Version: 1.0 Content-Type: text/plain; charset="Windows-1252" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi, I have a full working kernel with VME bus support (thx Gabriel for your patch and your help). The problem now is that I can't have the boot args working ! During the configuration of the kernel, I write "root=/dev/sda2 console=ttyS0" in the "initial kernel command string" , and only "console=ttyS0" is shown at boot prompt and the kernel don't see my haddrive! If I use the command (in PPCBUG): GEVEDIT bootargs bootargs=root=/dev/sda2 console=ttyS0 result : same as above ! Whats wrong ? I always need to write by hand "root=/dev/sda2" ! Please help me ! Thx in advance. ------------------------------------------------------- Lionel TAILLURAT TECHNICAL SERVICE ECRIN AUTOMATISMES -industrial computer's- Rue du pré-de-l'Horme B.P 15 38921 CROLLES CEDEX FRANCE Tel :(33) 4 76 92 20 01 Fax :(33) 4 76 08 03 18 Email: Lionel.TAILLURAT@ecrin.com --------------------------------------------------------- ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/