kernel 2.4.2 build fails when I enable modules support

linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed

* kernel 2.4.2 build fails when I enable modules support
@ 2001-04-05 18:49 Marcio Koch
  2001-04-06  6:46 ` machael
  0 siblings, 1 reply; 3+ messages in thread
From: Marcio Koch @ 2001-04-05 18:49 UTC (permalink / raw)
  To: LinuxPPC-Embedded


Hi,

I'm trying to build kernel 2.4.2 for the mpc860 with modules, but it fails
in make zImage (more details, below the .config).

Here is the .config I'm using:

#
# Automatically generated by make menuconfig: don't edit
#
# CONFIG_UID16 is not set

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y

#
# Platform support
#
CONFIG_PPC=y
# CONFIG_6xx is not set
# CONFIG_4xx is not set
# CONFIG_POWER3 is not set
# CONFIG_POWER4 is not set
CONFIG_8xx=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_RPXLITE is not set
# CONFIG_RPXCLASSIC is not set
CONFIG_BSEIP=y
# CONFIG_TQM8xxL is not set
# CONFIG_TQM860L is not set
# CONFIG_TQM860 is not set
# CONFIG_MBX is not set
# CONFIG_WINCEPT is not set
# CONFIG_PPC601_SYNC_FIX is not set
# CONFIG_ALL_PPC is not set
# CONFIG_SMP is not set
CONFIG_MACH_SPECIFIC=y
CONFIG_MATH_EMULATION=y

#
# General setup
#
# CONFIG_HIGHMEM is not set
# CONFIG_MOL is not set
# CONFIG_ISA is not set
# CONFIG_EISA is not set
# CONFIG_SBUS is not set
# CONFIG_MCA is not set
# CONFIG_PCI_QSPAN is not set
# CONFIG_PCI is not set
CONFIG_NET=y
CONFIG_SYSCTL=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_ELF=y
CONFIG_KERNEL_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_HOTPLUG is not set
# CONFIG_PCMCIA is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
CONFIG_MTD_DEBUG=y
CONFIG_MTD_DEBUG_VERBOSE=3
# CONFIG_MTD_DOC1000 is not set
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOCPROBE is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_MTDRAM is not set
CONFIG_MTD_CFI=m
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=m
# CONFIG_MTD_JEDEC is not set
# CONFIG_MTD_PHYSMAP is not set
# CONFIG_MTD_MIXMEM is not set
# CONFIG_MTD_NORA is not set
# CONFIG_MTD_OCTAGON is not set
# CONFIG_MTD_PNC2000 is not set
CONFIG_MTD_RPXLITE=m
# CONFIG_MTD_VMAX is not set
# CONFIG_MTD_CHAR is not set
# CONFIG_MTD_BLOCK is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set

#
# Plug and Play configuration
#
# CONFIG_PNP is not set
# CONFIG_ISAPNP is not set

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_BLK_DEV_INITRD is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
# CONFIG_BLK_DEV_MD is not set
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_BLK_DEV_LVM is not set

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_NETLINK=y
# CONFIG_RTNETLINK is not set
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_LLC is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# ATA/IDE/MFM/RLL support
#
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI support
#
# CONFIG_SCSI is not set

#
# Network device support
#
CONFIG_NETDEVICES=y

#
# ARCnet devices
#
# CONFIG_ARCNET is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
# CONFIG_NET_SB1000 is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
# CONFIG_MACE is not set
# CONFIG_BMAC is not set
# CONFIG_GMAC is not set
# CONFIG_NCR885E is not set
# CONFIG_OAKNET is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_APRICOT is not set
# CONFIG_CS89x0 is not set
# CONFIG_TULIP is not set
# CONFIG_DM9102 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_EEPRO100_PM is not set
# CONFIG_LNE390 is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_NE3210 is not set
# CONFIG_ES3210 is not set
# CONFIG_8139TOO is not set
# CONFIG_RTL8129 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Token Ring devices
#
# CONFIG_TR is not set
# CONFIG_NET_FC is not set
# CONFIG_RCPCI is not set
# CONFIG_SHAPER is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set

#
# Amateur Radio support
#
# CONFIG_HAMRADIO is not set

#
# IrDA (infrared) support
#
# CONFIG_IRDA is not set

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Console drivers
#

#
# Frame-buffer support
#
# CONFIG_FB is not set

#
# Input core support
#
# CONFIG_INPUT is not set

#
# Macintosh device drivers
#

#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256

#
# I2C support
#
# CONFIG_I2C is not set

#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set

#
# Joysticks
#
# CONFIG_JOYSTICK is not set
# CONFIG_QIC02_TAPE is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_FAT_FS is not set
# CONFIG_MSDOS_FS is not set
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=3
# CONFIG_CRAMFS is not set
# CONFIG_RAMFS is not set
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_MINIX_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_RW is not set
# CONFIG_HPFS_FS is not set
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
# CONFIG_DEVFS_MOUNT is not set
# CONFIG_DEVFS_DEBUG is not set
CONFIG_DEVPTS_FS=y
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX4FS_RW is not set
# CONFIG_ROMFS_FS is not set
CONFIG_EXT2_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_SYSV_FS_WRITE is not set
# CONFIG_UDF_FS is not set
# CONFIG_UDF_RW is not set
# CONFIG_UFS_FS is not set
# CONFIG_UFS_FS_WRITE is not set

#
# Network File Systems
#
# CONFIG_CODA_FS is not set
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
CONFIG_ROOT_NFS=y
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
# CONFIG_NCPFS_IOCTL_LOCKING is not set
# CONFIG_NCPFS_STRONG is not set
# CONFIG_NCPFS_NFS_NS is not set
# CONFIG_NCPFS_OS2_NS is not set
# CONFIG_NCPFS_SMALLDOS is not set
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_SMB_NLS is not set
# CONFIG_NLS is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# MPC8xx CPM Options
#
CONFIG_SCC_ENET=y
# CONFIG_SCC1_ENET is not set
CONFIG_SCC2_ENET=y
# CONFIG_FEC_ENET is not set
# CONFIG_ENET_BIG_BUFFERS is not set
# CONFIG_8xxSMC2 is not set
# CONFIG_8xxSCC is not set
# CONFIG_8xx_COPYBACK is not set
# CONFIG_8xx_CPU6 is not set

#
# USB support
#
# CONFIG_USB is not set

#
# Kernel hacking
#
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_KGDB is not set
# CONFIG_XMON is not set


Here is the kernel build error:

..
/opt/hardhat/devkit/ppc/8xx/bin/ppc_8xx-ld -T arch/ppc/vmlinux.lds -Ttext
0xc0000000 -Bstatic arch/ppc/kernel/head_8xx.o init/main.o init/version.o \
	--start-group \
	arch/ppc/kernel/kernel.o arch/ppc/mm/mm.o arch/ppc/lib/lib.o
kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o arch/ppc/math-emu/math-emu.o \
	drivers/block/block.o drivers/char/char.o drivers/misc/misc.o
drivers/net/net.o drivers/media/media.o  arch/ppc/8xx_io/8xx_io.o \
	net/network.o \
	/usr/local/src/linux-2.4.2/lib/lib.a \
	--end-group \
	-o vmlinux
arch/ppc/kernel/kernel.o(__ksymtab+0x210): undefined reference to
`sys_ctrler'
arch/ppc/kernel/kernel.o(__ksymtab+0x218): undefined reference to
`kd_mksound'
make: ** [vmlinux] Erro 1


I'm using gcc version:

Reading specs from /opt/hardhat/devkit/ppc/8xx/lib/gcc-lib/powerpc-hardhat-linux/2.95.2/specs
gcc version 2.95.2 19991030 (2.95.3 prerelease/franzo)


Is this kernel the most apropriate for PPC embedded development? Because
I've tryied the RTLinux-kernel-2.4 and the MVista linux-2.4.0-test2 and had
no success.

I have to compile the kernel with modules support so I can debug the
mtd-jffs on the flash.


Any help ? What may be causing this error ?


Best regards,

Marcio Koch
koch@inf.pucrs.br
PUCRS/ELinux


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: kernel 2.4.2 build fails when I enable modules support
  2001-04-05 18:49 kernel 2.4.2 build fails when I enable modules support Marcio Koch
@ 2001-04-06  6:46 ` machael
  2001-04-06 21:13   ` Marcio Koch
  0 siblings, 1 reply; 3+ messages in thread
From: machael @ 2001-04-06  6:46 UTC (permalink / raw)
  To: Marcio Koch, LinuxPPC-Embedded


Hi, Marcio, You should make such modifications in
arch/ppc/kernel/ppc_ksyms.c

+#ifdef CONFIG_VT
    EXPORT_SYMBOL(kd_mksound);
+#endif

+#ifdef CONFIG_ALL_PPC
    EXPORT_SYMBOL(sys_ctrler);
+#endif

Cheers,

machael


----- Original Message -----
From: "Marcio Koch" <koch@inf.pucrs.br>
To: "LinuxPPC-Embedded" <linuxppc-embedded@lists.linuxppc.org>
Sent: Friday, April 06, 2001 2:49 AM
Subject: kernel 2.4.2 build fails when I enable modules support


>
> Hi,
>
> I'm trying to build kernel 2.4.2 for the mpc860 with modules, but it fails
> in make zImage (more details, below the .config).
>
> Here is the .config I'm using:
>
> #
> # Automatically generated by make menuconfig: don't edit
> #
> # CONFIG_UID16 is not set
>
> #
> # Code maturity level options
> #
> CONFIG_EXPERIMENTAL=y
>
> #
> # Loadable module support
> #
> CONFIG_MODULES=y
> CONFIG_MODVERSIONS=y
> CONFIG_KMOD=y
>
> #
> # Platform support
> #
> CONFIG_PPC=y
> # CONFIG_6xx is not set
> # CONFIG_4xx is not set
> # CONFIG_POWER3 is not set
> # CONFIG_POWER4 is not set
> CONFIG_8xx=y
> CONFIG_SERIAL_CONSOLE=y
> # CONFIG_RPXLITE is not set
> # CONFIG_RPXCLASSIC is not set
> CONFIG_BSEIP=y
> # CONFIG_TQM8xxL is not set
> # CONFIG_TQM860L is not set
> # CONFIG_TQM860 is not set
> # CONFIG_MBX is not set
> # CONFIG_WINCEPT is not set
> # CONFIG_PPC601_SYNC_FIX is not set
> # CONFIG_ALL_PPC is not set
> # CONFIG_SMP is not set
> CONFIG_MACH_SPECIFIC=y
> CONFIG_MATH_EMULATION=y
>
> #
> # General setup
> #
> # CONFIG_HIGHMEM is not set
> # CONFIG_MOL is not set
> # CONFIG_ISA is not set
> # CONFIG_EISA is not set
> # CONFIG_SBUS is not set
> # CONFIG_MCA is not set
> # CONFIG_PCI_QSPAN is not set
> # CONFIG_PCI is not set
> CONFIG_NET=y
> CONFIG_SYSCTL=y
> CONFIG_SYSVIPC=y
> # CONFIG_BSD_PROCESS_ACCT is not set
> CONFIG_KCORE_ELF=y
> CONFIG_BINFMT_ELF=y
> CONFIG_KERNEL_ELF=y
> # CONFIG_BINFMT_MISC is not set
> # CONFIG_HOTPLUG is not set
> # CONFIG_PCMCIA is not set
>
> #
> # Parallel port support
> #
> # CONFIG_PARPORT is not set
>
> #
> # Memory Technology Devices (MTD)
> #
> CONFIG_MTD=m
> CONFIG_MTD_DEBUG=y
> CONFIG_MTD_DEBUG_VERBOSE=3
> # CONFIG_MTD_DOC1000 is not set
> # CONFIG_MTD_DOC2000 is not set
> # CONFIG_MTD_DOC2001 is not set
> # CONFIG_MTD_DOCPROBE is not set
> # CONFIG_MTD_SLRAM is not set
> # CONFIG_MTD_PMC551 is not set
> # CONFIG_MTD_MTDRAM is not set
> CONFIG_MTD_CFI=m
> # CONFIG_MTD_CFI_INTELEXT is not set
> # CONFIG_MTD_CFI_AMDSTD is not set
> # CONFIG_MTD_RAM is not set
> CONFIG_MTD_ROM=m
> # CONFIG_MTD_JEDEC is not set
> # CONFIG_MTD_PHYSMAP is not set
> # CONFIG_MTD_MIXMEM is not set
> # CONFIG_MTD_NORA is not set
> # CONFIG_MTD_OCTAGON is not set
> # CONFIG_MTD_PNC2000 is not set
> CONFIG_MTD_RPXLITE=m
> # CONFIG_MTD_VMAX is not set
> # CONFIG_MTD_CHAR is not set
> # CONFIG_MTD_BLOCK is not set
> # CONFIG_FTL is not set
> # CONFIG_NFTL is not set
>
> #
> # Plug and Play configuration
> #
> # CONFIG_PNP is not set
> # CONFIG_ISAPNP is not set
>
> #
> # Block devices
> #
> # CONFIG_BLK_DEV_FD is not set
> # CONFIG_BLK_DEV_XD is not set
> # CONFIG_PARIDE is not set
> # CONFIG_BLK_CPQ_DA is not set
> # CONFIG_BLK_CPQ_CISS_DA is not set
> # CONFIG_BLK_DEV_DAC960 is not set
> # CONFIG_BLK_DEV_LOOP is not set
> # CONFIG_BLK_DEV_NBD is not set
> # CONFIG_BLK_DEV_RAM is not set
> # CONFIG_BLK_DEV_INITRD is not set
>
> #
> # Multi-device support (RAID and LVM)
> #
> # CONFIG_MD is not set
> # CONFIG_BLK_DEV_MD is not set
> # CONFIG_MD_LINEAR is not set
> # CONFIG_MD_RAID0 is not set
> # CONFIG_MD_RAID1 is not set
> # CONFIG_MD_RAID5 is not set
> # CONFIG_BLK_DEV_LVM is not set
>
> #
> # Networking options
> #
> CONFIG_PACKET=y
> # CONFIG_PACKET_MMAP is not set
> CONFIG_NETLINK=y
> # CONFIG_RTNETLINK is not set
> # CONFIG_NETLINK_DEV is not set
> # CONFIG_NETFILTER is not set
> # CONFIG_FILTER is not set
> CONFIG_UNIX=y
> CONFIG_INET=y
> CONFIG_IP_MULTICAST=y
> # CONFIG_IP_ADVANCED_ROUTER is not set
> CONFIG_IP_PNP=y
> CONFIG_IP_PNP_BOOTP=y
> # CONFIG_IP_PNP_RARP is not set
> # CONFIG_NET_IPIP is not set
> # CONFIG_NET_IPGRE is not set
> # CONFIG_IP_MROUTE is not set
> # CONFIG_INET_ECN is not set
> # CONFIG_SYN_COOKIES is not set
> # CONFIG_IPV6 is not set
> # CONFIG_KHTTPD is not set
> # CONFIG_ATM is not set
> # CONFIG_IPX is not set
> # CONFIG_ATALK is not set
> # CONFIG_DECNET is not set
> # CONFIG_BRIDGE is not set
> # CONFIG_X25 is not set
> # CONFIG_LAPB is not set
> # CONFIG_LLC is not set
> # CONFIG_NET_DIVERT is not set
> # CONFIG_ECONET is not set
> # CONFIG_WAN_ROUTER is not set
> # CONFIG_NET_FASTROUTE is not set
> # CONFIG_NET_HW_FLOWCONTROL is not set
>
> #
> # QoS and/or fair queueing
> #
> # CONFIG_NET_SCHED is not set
>
> #
> # ATA/IDE/MFM/RLL support
> #
> # CONFIG_IDE is not set
> # CONFIG_BLK_DEV_IDE_MODES is not set
> # CONFIG_BLK_DEV_HD is not set
>
> #
> # SCSI support
> #
> # CONFIG_SCSI is not set
>
> #
> # Network device support
> #
> CONFIG_NETDEVICES=y
>
> #
> # ARCnet devices
> #
> # CONFIG_ARCNET is not set
> # CONFIG_DUMMY is not set
> # CONFIG_BONDING is not set
> # CONFIG_EQUALIZER is not set
> # CONFIG_TUN is not set
> # CONFIG_ETHERTAP is not set
> # CONFIG_NET_SB1000 is not set
>
> #
> # Ethernet (10 or 100Mbit)
> #
> CONFIG_NET_ETHERNET=y
> # CONFIG_MACE is not set
> # CONFIG_BMAC is not set
> # CONFIG_GMAC is not set
> # CONFIG_NCR885E is not set
> # CONFIG_OAKNET is not set
> # CONFIG_NET_VENDOR_3COM is not set
> # CONFIG_LANCE is not set
> # CONFIG_NET_VENDOR_SMC is not set
> # CONFIG_NET_VENDOR_RACAL is not set
> # CONFIG_AT1700 is not set
> # CONFIG_DEPCA is not set
> # CONFIG_NET_ISA is not set
> CONFIG_NET_PCI=y
> # CONFIG_PCNET32 is not set
> # CONFIG_ADAPTEC_STARFIRE is not set
> # CONFIG_APRICOT is not set
> # CONFIG_CS89x0 is not set
> # CONFIG_TULIP is not set
> # CONFIG_DM9102 is not set
> # CONFIG_EEPRO100 is not set
> # CONFIG_EEPRO100_PM is not set
> # CONFIG_LNE390 is not set
> # CONFIG_NATSEMI is not set
> # CONFIG_NE2K_PCI is not set
> # CONFIG_NE3210 is not set
> # CONFIG_ES3210 is not set
> # CONFIG_8139TOO is not set
> # CONFIG_RTL8129 is not set
> # CONFIG_SIS900 is not set
> # CONFIG_EPIC100 is not set
> # CONFIG_SUNDANCE is not set
> # CONFIG_VIA_RHINE is not set
> # CONFIG_WINBOND_840 is not set
> # CONFIG_HAPPYMEAL is not set
> # CONFIG_NET_POCKET is not set
>
> #
> # Ethernet (1000 Mbit)
> #
> # CONFIG_ACENIC is not set
> # CONFIG_HAMACHI is not set
> # CONFIG_YELLOWFIN is not set
> # CONFIG_SK98LIN is not set
> # CONFIG_FDDI is not set
> # CONFIG_HIPPI is not set
> # CONFIG_PPP is not set
> # CONFIG_SLIP is not set
>
> #
> # Wireless LAN (non-hamradio)
> #
> # CONFIG_NET_RADIO is not set
>
> #
> # Token Ring devices
> #
> # CONFIG_TR is not set
> # CONFIG_NET_FC is not set
> # CONFIG_RCPCI is not set
> # CONFIG_SHAPER is not set
>
> #
> # Wan interfaces
> #
> # CONFIG_WAN is not set
>
> #
> # Amateur Radio support
> #
> # CONFIG_HAMRADIO is not set
>
> #
> # IrDA (infrared) support
> #
> # CONFIG_IRDA is not set
>
> #
> # ISDN subsystem
> #
> # CONFIG_ISDN is not set
>
> #
> # Old CD-ROM drivers (not SCSI, not IDE)
> #
> # CONFIG_CD_NO_IDESCSI is not set
>
> #
> # Console drivers
> #
>
> #
> # Frame-buffer support
> #
> # CONFIG_FB is not set
>
> #
> # Input core support
> #
> # CONFIG_INPUT is not set
>
> #
> # Macintosh device drivers
> #
>
> #
> # Character devices
> #
> # CONFIG_VT is not set
> # CONFIG_SERIAL is not set
> # CONFIG_SERIAL_EXTENDED is not set
> # CONFIG_SERIAL_NONSTANDARD is not set
> CONFIG_UNIX98_PTYS=y
> CONFIG_UNIX98_PTY_COUNT=256
>
> #
> # I2C support
> #
> # CONFIG_I2C is not set
>
> #
> # Mice
> #
> # CONFIG_BUSMOUSE is not set
> # CONFIG_MOUSE is not set
>
> #
> # Joysticks
> #
> # CONFIG_JOYSTICK is not set
> # CONFIG_QIC02_TAPE is not set
>
> #
> # Watchdog Cards
> #
> # CONFIG_WATCHDOG is not set
> # CONFIG_INTEL_RNG is not set
> # CONFIG_NVRAM is not set
> # CONFIG_RTC is not set
> # CONFIG_DTLK is not set
> # CONFIG_R3964 is not set
> # CONFIG_APPLICOM is not set
>
> #
> # Ftape, the floppy tape device driver
> #
> # CONFIG_FTAPE is not set
> # CONFIG_AGP is not set
> # CONFIG_DRM is not set
>
> #
> # Multimedia devices
> #
> # CONFIG_VIDEO_DEV is not set
>
> #
> # File systems
> #
> # CONFIG_QUOTA is not set
> # CONFIG_AUTOFS_FS is not set
> # CONFIG_AUTOFS4_FS is not set
> # CONFIG_REISERFS_FS is not set
> # CONFIG_REISERFS_CHECK is not set
> # CONFIG_ADFS_FS is not set
> # CONFIG_ADFS_FS_RW is not set
> # CONFIG_AFFS_FS is not set
> # CONFIG_HFS_FS is not set
> # CONFIG_BFS_FS is not set
> # CONFIG_FAT_FS is not set
> # CONFIG_MSDOS_FS is not set
> # CONFIG_UMSDOS_FS is not set
> # CONFIG_VFAT_FS is not set
> # CONFIG_EFS_FS is not set
> CONFIG_JFFS_FS=m
> CONFIG_JFFS_FS_VERBOSE=3
> # CONFIG_CRAMFS is not set
> # CONFIG_RAMFS is not set
> # CONFIG_ISO9660_FS is not set
> # CONFIG_JOLIET is not set
> # CONFIG_MINIX_FS is not set
> # CONFIG_NTFS_FS is not set
> # CONFIG_NTFS_RW is not set
> # CONFIG_HPFS_FS is not set
> CONFIG_PROC_FS=y
> # CONFIG_DEVFS_FS is not set
> # CONFIG_DEVFS_MOUNT is not set
> # CONFIG_DEVFS_DEBUG is not set
> CONFIG_DEVPTS_FS=y
> # CONFIG_QNX4FS_FS is not set
> # CONFIG_QNX4FS_RW is not set
> # CONFIG_ROMFS_FS is not set
> CONFIG_EXT2_FS=y
> # CONFIG_SYSV_FS is not set
> # CONFIG_SYSV_FS_WRITE is not set
> # CONFIG_UDF_FS is not set
> # CONFIG_UDF_RW is not set
> # CONFIG_UFS_FS is not set
> # CONFIG_UFS_FS_WRITE is not set
>
> #
> # Network File Systems
> #
> # CONFIG_CODA_FS is not set
> CONFIG_NFS_FS=y
> # CONFIG_NFS_V3 is not set
> CONFIG_ROOT_NFS=y
> # CONFIG_NFSD is not set
> # CONFIG_NFSD_V3 is not set
> CONFIG_SUNRPC=y
> CONFIG_LOCKD=y
> # CONFIG_SMB_FS is not set
> # CONFIG_NCP_FS is not set
> # CONFIG_NCPFS_PACKET_SIGNING is not set
> # CONFIG_NCPFS_IOCTL_LOCKING is not set
> # CONFIG_NCPFS_STRONG is not set
> # CONFIG_NCPFS_NFS_NS is not set
> # CONFIG_NCPFS_OS2_NS is not set
> # CONFIG_NCPFS_SMALLDOS is not set
> # CONFIG_NCPFS_NLS is not set
> # CONFIG_NCPFS_EXTRAS is not set
>
> #
> # Partition Types
> #
> CONFIG_PARTITION_ADVANCED=y
> # CONFIG_ACORN_PARTITION is not set
> # CONFIG_OSF_PARTITION is not set
> # CONFIG_AMIGA_PARTITION is not set
> # CONFIG_ATARI_PARTITION is not set
> # CONFIG_MAC_PARTITION is not set
> # CONFIG_MSDOS_PARTITION is not set
> # CONFIG_SGI_PARTITION is not set
> # CONFIG_ULTRIX_PARTITION is not set
> # CONFIG_SUN_PARTITION is not set
> # CONFIG_SMB_NLS is not set
> # CONFIG_NLS is not set
>
> #
> # Sound
> #
> # CONFIG_SOUND is not set
>
> #
> # MPC8xx CPM Options
> #
> CONFIG_SCC_ENET=y
> # CONFIG_SCC1_ENET is not set
> CONFIG_SCC2_ENET=y
> # CONFIG_FEC_ENET is not set
> # CONFIG_ENET_BIG_BUFFERS is not set
> # CONFIG_8xxSMC2 is not set
> # CONFIG_8xxSCC is not set
> # CONFIG_8xx_COPYBACK is not set
> # CONFIG_8xx_CPU6 is not set
>
> #
> # USB support
> #
> # CONFIG_USB is not set
>
> #
> # Kernel hacking
> #
> # CONFIG_MAGIC_SYSRQ is not set
> # CONFIG_KGDB is not set
> # CONFIG_XMON is not set
>
>
> Here is the kernel build error:
>
> ..
> /opt/hardhat/devkit/ppc/8xx/bin/ppc_8xx-ld -T arch/ppc/vmlinux.lds -Ttext
> 0xc0000000 -Bstatic arch/ppc/kernel/head_8xx.o init/main.o init/version.o
\
> --start-group \
> arch/ppc/kernel/kernel.o arch/ppc/mm/mm.o arch/ppc/lib/lib.o
> kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o arch/ppc/math-emu/math-emu.o \
> drivers/block/block.o drivers/char/char.o drivers/misc/misc.o
> drivers/net/net.o drivers/media/media.o  arch/ppc/8xx_io/8xx_io.o \
> net/network.o \
> /usr/local/src/linux-2.4.2/lib/lib.a \
> --end-group \
> -o vmlinux
> arch/ppc/kernel/kernel.o(__ksymtab+0x210): undefined reference to
> `sys_ctrler'
> arch/ppc/kernel/kernel.o(__ksymtab+0x218): undefined reference to
> `kd_mksound'
> make: ** [vmlinux] Erro 1
>
>
> I'm using gcc version:
>
> Reading specs from
/opt/hardhat/devkit/ppc/8xx/lib/gcc-lib/powerpc-hardhat-linux/2.95.2/specs
> gcc version 2.95.2 19991030 (2.95.3 prerelease/franzo)
>
>
> Is this kernel the most apropriate for PPC embedded development? Because
> I've tryied the RTLinux-kernel-2.4 and the MVista linux-2.4.0-test2 and
had
> no success.
>
> I have to compile the kernel with modules support so I can debug the
> mtd-jffs on the flash.
>
>
> Any help ? What may be causing this error ?
>
>
> Best regards,
>
> Marcio Koch
> koch@inf.pucrs.br
> PUCRS/ELinux
>
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: kernel 2.4.2 build fails when I enable modules support
  2001-04-06  6:46 ` machael
@ 2001-04-06 21:13   ` Marcio Koch
  0 siblings, 0 replies; 3+ messages in thread
From: Marcio Koch @ 2001-04-06 21:13 UTC (permalink / raw)
  To: machael; +Cc: LinuxPPC-Embedded

Em 2001.04.06 03:46:22 -0300 machael escreveu:
>
> Hi, Marcio, You should make such modifications in
> arch/ppc/kernel/ppc_ksyms.c
>
> +#ifdef CONFIG_VT
>     EXPORT_SYMBOL(kd_mksound);
> +#endif
>
> +#ifdef CONFIG_ALL_PPC
>     EXPORT_SYMBOL(sys_ctrler);
> +#endif
>
> Cheers,
>
> machael
>
>

Thank you Machael this will help when I switch back to that kernel version,
because now I'm using the kernel 2.4.3-pre4 that I caught from
ftp://ftp.denx.de/pub/LinuxPPC/usr/src/. And it compiles ok with modules
support.

My problem now, is when I try to load the modules.

When I run:

sh-2.03# modprobe mtdchar

It fails with this error:

can't locate module mtdchar

And the modules are all there instaled in
$TARGET/lib/modules/2.4.3-pre4/...

sh-2.03# ls -lR /lib/modules/2.4.3-pre4/
/lib/modules/2.4.3-pre4/:
total 20
lrwxrwxrwx   1 root     root           42 Apr  6  2001 build ->
/usr/local/src/linux-2.4.3-pre4-2001-03-19
drwxrwxr-x   4 root     root         4096 Apr  6  2001 kernel
-rw-rw-r--   1 root     root            0 Apr  6  2001 modules.dep
-rw-rw-r--   1 root     root           81 Apr  6  2001 modules.isapnpmap
-rw-rw-r--   1 root     root           99 Apr  6  2001 modules.pcimap
-rw-rw-r--   1 root     root          177 Apr  6  2001 modules.usbmap
drwxrwxr-x   2 root     root         4096 Apr  6  2001 pcmcia

/lib/modules/2.4.3-pre4/kernel:
total 8
drwxrwxr-x   3 root     root         4096 Apr  6  2001 drivers
drwxrwxr-x   3 root     root         4096 Apr  6  2001 fs

/lib/modules/2.4.3-pre4/kernel/drivers:
total 4
drwxrwxr-x   2 root     root         4096 Apr  6  2001 mtd

/lib/modules/2.4.3-pre4/kernel/drivers/mtd:
total 72
-rw-rw-r--   1 root     root        11576 Apr  6  2001 cfi_probe.o
-rw-rw-r--   1 root     root        19060 Apr  6  2001 ftl.o
-rw-rw-r--   1 root     root         2360 Apr  6  2001 map_rom.o
-rw-rw-r--   1 root     root        11744 Apr  6  2001 mtdblock.o
-rw-rw-r--   1 root     root         8416 Apr  6  2001 mtdchar.o
-rw-rw-r--   1 root     root         6264 Apr  6  2001 mtdcore.o
-rw-rw-r--   1 root     root         3216 Apr  6  2001 rpxlite.o

/lib/modules/2.4.3-pre4/kernel/fs:
total 4
drwxrwxr-x   2 root     root         4096 Apr  6  2001 jffs

/lib/modules/2.4.3-pre4/kernel/fs/jffs:
total 84
-rw-rw-r--   1 root     root        79236 Apr  6  2001 jffs.o

/lib/modules/2.4.3-pre4/pcmcia:
total 0

The modules.dep file is empty, is that right ?

Here is the boot message:

Uncompressing Linux...done.
Now booting the kernel
Linux version 2.4.3-pre4 (root@sirrah.elinux.pucrs.br) (gcc version 2.95.2
19991030 (2.95.3 prerelease/franzo)) #1 Sex Abr 6 15:43:08 BRT 2001
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw
Decrementer Frequency: 3000000
Calibrating delay loop... 47.61 BogoMIPS
Memory: 14764k available (892k kernel code, 376k data, 44k init, 0k
highmem)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Starting kswapd v1.8
CPM UART driver version 0.03
ttyS0 on SMC1 at 0x0280, BRG1
pty: 256 Unix98 ptys configured
block: queued sectors max/low 9706kB/3235kB, 64 slots per queue
eth0: CPM ENET Version 0.2 on SCC2, 00:50:15:00:03:85
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
Sending BOOTP requests.... OK
IP-Config: Got BOOTP answer from 172.16.0.1, my address is 172.16.0.77
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: v0.102 (20000622) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x2
Looking up port of RPC 100003/2 on 172.16.0.1
Looking up port of RPC 100005/2 on 172.16.0.1
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 44k init
modprobe: can't locate module char-major-4
INIT: version 2.77 booting
INIT: Entering runlevel: 3

Take a look at the line just before INIT, what is this module char-major-4
about ? Is that the problem ?

Any help would be very appreciated.

Best regards,

Marcio Koch
koch@inf.pucrs.br
PUCRS/ELinux

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2001-04-06 21:13 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-04-05 18:49 kernel 2.4.2 build fails when I enable modules support Marcio Koch
2001-04-06  6:46 ` machael
2001-04-06 21:13   ` Marcio Koch

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).