linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Jacky Lam" <jackylam@astri.org>
To: "Wolfgang Denk" <wd@denx.de>
Cc: <linuxppc-embedded@lists.linuxppc.org>
Subject: Re: Queston about Walnut
Date: Fri, 3 Oct 2003 12:11:06 +0800	[thread overview]
Message-ID: <007101c38964$61f29a90$2803050a@JackyLam> (raw)
In-Reply-To: 20031002121733.A2E32C59E4@atlas.denx.de


        I trace the code in kernel and I found some strange behaviors.
        In the first case (using walnut_config provided in kernel source),
kernel hangs at mapin_ram();
        However, if I turn off all unnecssary options and leave only serial
console, my kernel can run until init/main.c: kmem_cache_init();

        As both hangs in memory related function, I tried to run a memory
test on my board in u-boot. But it hangs.

        => mtest 0 3ffffff
        Pattern 00000000  Writing...
        <hangs>

    I tried smaller range (ffffff), it still hangs.

    I am sure my board's memory is in good condition because VxWorks can run
very well on it. Have any idea? Thanks.

Best regards,
Jacky





----- Original Message -----
From: "Wolfgang Denk" <wd@denx.de>
To: "Jacky Lam" <jackylam@astri.org>
Cc: <linuxppc-embedded@lists.linuxppc.org>
Sent: Thursday, October 02, 2003 8:17 PM
Subject: Re: Queston about Walnut


>
> In message <000e01c388dc$eb525510$0202a8c0@homevl9biy3v7e> you wrote:
> >
> > > Who gave you such (obviously wrong) instructions?
> >
> >         I take the example of u-boot to create the "uImage" and download
it
> > to the board.
>
> Please show me which U-Boot document uses 0x00400000 as load or entry
> point address so I can fix this immediately. It is WRONG  and  CANNOT
> work.
>
> > > For PowerPC systems, both  Load  Address  and  Entry  Point  must  be
> > > specified as 0.
> >
> >         I have tried 0 before. But I get an exception in return. Could
you
> > kindly give me some instructions how to run a kernel on this board?
>
> Please start by giving a precise description of  what  you  did.  and
> which error messages you got.
>
> You "get an exception" - when? When running "mkimage"?  When  booting
> the kernel? Which sort of exception? What is the exact error message?
> Please include a complete log of your actions and all output.
>
> Best regards,
>
> Wolfgang Denk
>
> --
> Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
> Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd@denx.de
> Totally illogical, there was no chance.
> -- Spock, "The Galileo Seven", stardate 2822.3
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

  parent reply	other threads:[~2003-10-03  4:11 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <000e01c388dc$eb525510$0202a8c0@homevl9biy3v7e>
2003-10-02 12:17 ` Queston about Walnut Wolfgang Denk
2003-10-03  1:18   ` Jacky Lam
     [not found]     ` <3F7D3238.2090400@bluewin.ch>
2003-10-03  9:40       ` Jacky Lam
2003-10-03 15:07         ` Matt Porter
2003-10-03 16:34           ` Jacky Lam
2003-10-04 16:07             ` Matt Porter
2003-10-03 16:10         ` Dan Kegel
2003-10-03 16:45           ` Jacky Lam
2003-10-03 17:31             ` Dan Kegel
     [not found]       ` <20031003151729.GC21468@ip68-0-152-218.tc.ph.cox.net>
2003-10-03 23:36         ` Kernel versions Gary Thomas
2003-10-07 13:37           ` Tom Rini
2003-10-03  4:11   ` Jacky Lam [this message]
2003-10-03  7:44     ` Queston about Walnut Jacky Lam
2003-10-03 13:51 ARIBAUD Albert
  -- strict thread matches above, loose matches on Subject: below --
2003-10-03  7:57 ARIBAUD Albert
2003-10-03  8:26 ` Jacky Lam
2003-10-02  9:17 Jacky Lam
2003-10-02 10:13 ` Wolfgang Denk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='007101c38964$61f29a90$2803050a@JackyLam' \
    --to=jackylam@astri.org \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    --cc=wd@denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).