* mpc8260 TDM I/O programming
@ 2002-07-22 17:29 Ing.Gianfranco Morandi
0 siblings, 0 replies; only message in thread
From: Ing.Gianfranco Morandi @ 2002-07-22 17:29 UTC (permalink / raw)
To: LinuxPPC
Hello,
I'm working with a board which is derived from EST SBC8260 with Linux
2.4.0-test2 where I'm trying to program the MCC in conjunction with TDM1C
and TDM1D.
On the same pins, can be configured both SCC3 and SCC4. For this reason I
have disabled the I/O programming which is performed into the module
arch/ppc/8260_io/uart.c.
Now, upgrading the kernel revision, by using the file uart.c of 2.4.18 I
have performed the same operation but I'm not able to load anymore the
related mcc driver (with "insmod" command).
Anybody can give me the some reference to understand what is changed?
Many thanks
Gianfranco Morandi
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-07-22 17:29 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-07-22 17:29 mpc8260 TDM I/O programming Ing.Gianfranco Morandi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).