From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <007601c105e0$06624040$3877b5d3@dolbae> From: "SangTae Ha" To: Cc: References: Subject: Re: microcode patch for smc1, scc3? Date: Fri, 6 Jul 2001 14:53:39 +0900 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: You had better use smc2 instead. I had a exact same problem with you on my early work with 850DE. Finally I used smc2 instead in order to bring up all interfaces. It works well. Cheers! Regards, SangTae Ha ----- Original Message ----- From: "Yoo. Jonghoon" To: "linuxppc-embedded" Sent: Friday, July 06, 2001 11:20 AM Subject: microcode patch for smc1, scc3? > > Hi. > my custom board(850DE) uses smc1 for console and > scc2, scc3 for ethernet. I found that scc3 does not work > because of conflicting dpram area. > Does anybody know microcode patch relocates smc1 > to some other place? I've searched motorola site but > couldn't find that. > is there exists such microcode patch? or must I change > console to smc2? > > thanks in advance. > > =============================================== > Yoo. Jonghoon, IPone inc. > =============================================== > e-mail : yooth@ipone.co.kr > tel : 82-2-02-2222-4631 > =============================================== > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/