* Atmel Flash
@ 2002-11-05 18:47 Ing.Gianfranco Morandi
0 siblings, 0 replies; only message in thread
From: Ing.Gianfranco Morandi @ 2002-11-05 18:47 UTC (permalink / raw)
To: LinuxPPC
I am trying to modify the board specific routine "flash.c" to perform erase,
write and other procedure on my custom board (that use an mpc8260 and is
derived from est8260).
We are using an ATMEL AT49BV1614-90TI but unfortunately we are not able to
read the product IDs.
We have tested the same code with a Fujitsu MBM29LV160B (which should be
compatible) and it is working.
I have read the data sheet carefully but I did not see any evidence?
Anybody knows if there is some trick to apply?
Gianfranco
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-11-05 18:47 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-05 18:47 Atmel Flash Ing.Gianfranco Morandi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).