* Problem with FEC
@ 2002-11-22 17:54 Ing.Gianfranco Morandi
0 siblings, 0 replies; only message in thread
From: Ing.Gianfranco Morandi @ 2002-11-22 17:54 UTC (permalink / raw)
To: LinuxPPC
We are using a custom 8260 board (which is based on est8260) where we have
configured the SCC1 as 10Mbit Ethernet (eth0), FCC1 (eth1) and FCC2 (eth2)
as Fast Ethernet.
We are using the PPcboot 1.2.0 on eth0 together with the ELDK.
When we configure only SCC1 and FCC2 it's all OK, and the two interfaces
have different MAC addresses, when we try to use both FCC1 and FCC2 (or FCC1
only) together with SCC1 we are able to configure the eth1 and eth2 I/Fs but
we do not have any ping out from them. Moreover we have noted that eth0 and
eth1 (when is on FCC1) have the same MAC address.
Any suggestions?
Many thanks
Gianfranco
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-11-22 17:54 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-11-22 17:54 Problem with FEC Ing.Gianfranco Morandi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).