linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: "Ing.Gianfranco Morandi" <gianfranco.morandi@euro-studio.it>
To: "LinuxPPC" <linuxppc-embedded@lists.linuxppc.org>
Subject: HHL 2.1 preview kit
Date: Thu, 3 Oct 2002 16:10:46 +0200	[thread overview]
Message-ID: <009701c26ae6$ab351400$0700a8c0@pc005> (raw)


Hi to all,

I have a question regarding the preview kit of Montavista.

I have downloaded the CD Image and installed the tools for the Sandpoint
8240 (which should be an 82xx architecture).

When I try to configure the kernel with "make config" command, no processor
other than x86 can be selected.
In other word I cannot select the Power PC architecture.

I would like to install the kit for the EST8260 board and I thought that
such installation was a good base to start.

Anybody has suggestions to give me?

Any help is appreciated.

Gianfranco


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

             reply	other threads:[~2002-10-03 14:10 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-10-03 14:10 Ing.Gianfranco Morandi [this message]
  -- strict thread matches above, loose matches on Subject: below --
2002-10-03 14:20 HHL 2.1 preview kit Yu Bo-BOYU1
2002-10-05 11:07 Fw: " Ing.Gianfranco Morandi
2002-10-06 23:04 ` Chuck Meade

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='009701c26ae6$ab351400$0700a8c0@pc005' \
    --to=gianfranco.morandi@euro-studio.it \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).