How do I get the c++ compiler

How do I get the c++ compiler

[John Jones]

How do I get the c++ compiler on the nfs drive?  I have an Embedded
Planet clcc.

I try to install the: hhl-ppc_8xx-c++-2.95.2-13.ppc.rpm by running the
command

rpm -ihv hhl-ppc_8xx-c++-2.95.2-13.ppc.rpm (from my i386 host machine)
and Iget the error: package hhl-ppc_8xx-c++-2.95.2-13 is for a different
architecture.

I have already installed the i386 version, but I think that is just for
my i386 host, right?

Am I supposed to install the ppc.rpm FROM the target machine?  It does
not seem to
have the rpm program to do so.

HELP.

Thanks.

-John


--
<Help further Linux by signing the Linux Driver Petition:
http://www.libranet.com/petition.html>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: How do I get the c++ compiler

[Cal Erickson]

John,
The .ppc.rpm packages are built to run on a Yellow Dog host.
MontaVista has not made the compilers/assembler/linker
available to run on the target hardware. The reason for this
is the requirement for temporary files and space considerations.

Cal

John Jones wrote:

> How do I get the c++ compiler on the nfs drive?  I have an Embedded
> Planet clcc.
>
> I try to install the: hhl-ppc_8xx-c++-2.95.2-13.ppc.rpm by running the
> command
>
> rpm -ihv hhl-ppc_8xx-c++-2.95.2-13.ppc.rpm (from my i386 host machine)
> and Iget the error: package hhl-ppc_8xx-c++-2.95.2-13 is for a different
> architecture.
>
> I have already installed the i386 version, but I think that is just for
> my i386 host, right?
>
> Am I supposed to install the ppc.rpm FROM the target machine?  It does
> not seem to
> have the rpm program to do so.
>
> HELP.
>
> Thanks.
>
> -John
>
> --
> <Help further Linux by signing the Linux Driver Petition:
> http://www.libranet.com/petition.html>
>

--
===========================================================================
Cal Erickson                 MontaVista Software Inc.
Customer Support Engineer    490 Potrero Avenue
Phone (408) 328-0304         Sunnyvale CA 94085
Fax   (408) 328-9204         e-mail cal_erickson@mvista.com
Pager 877-566-2012           support 1-800-759-8888 pin 202-7489
web http://www.mvista.com    support e-mail: support@mvista.com
eCode: http://cal@work.com.ecode.com
===========================================================================


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

about ACE860 board

[Íõ³¬·å]

Hi,

Does somebody know the ATLAS ACE860 DARWIN board?
It's monitor can auto test the 4M/8M DRAM successfully.
But when I insert a 32M DRAM, the monitor only pass 16M, then test failed.
I use BDM test it, only can access 16M too.
Is this the bug of this board?

Best regards,
Wang Chao Feng

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: about ACE860 board

[john zhan]

Some older board and its monitor do not support the SIMM which is more than 16MB.

Refer to ACE860 home,I am not sure its still there : www.ace360.com
If you are using ICE/BDM,please check the value of br(x) and or(x) ,(x) is which
CS your SIMM connect to.

For more information,please go to www.fel.com.cn ,
Don't fuck me,
it's none of my business,
 chinese only,:-)

john zhan.

----- Original Message -----
From: Íõ³¬·å <chfwang@sina.com.cn>
To: LinuxPPC Mailing List <linuxppc-embedded@lists.linuxppc.org>
Sent: Wednesday, November 08, 2000 6:56 PM
Subject: about ACE860 board


>
> Hi,
>
> Does somebody know the ATLAS ACE860 DARWIN board?
> It's monitor can auto test the 4M/8M DRAM successfully.
> But when I insert a 32M DRAM, the monitor only pass 16M, then test failed.
> I use BDM test it, only can access 16M too.
> Is this the bug of this board?
>
> Best regards,
> Wang Chao Feng
>
>
>


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/