From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Clayton Reply-To: clayton@shore.net To: Dave Pegler Subject: Re: ATM driver for 8260 Date: Sun, 4 Feb 2001 08:59:02 -0500 Content-Type: text/plain Cc: linuxppc-embedded@lists.linuxppc.org, dwp@cambridgebroadband.com References: <200102061511.KAA17221@northshore.shore.net> <14976.13620.587588.692077@gargle.gargle.HOWL> In-Reply-To: <14976.13620.587588.692077@gargle.gargle.HOWL> MIME-Version: 1.0 Message-Id: <01020409004700.06493@barharbor> Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: I was under the impression that the 8260 and the 860 were very different. After looking at the example code from Motorola. I'm not so sure that I would be much help in working on it. Much thanks, Mark On Tue, 06 Feb 2001, Dave Pegler wrote: > Mark, > > I've been working on a driver for the MPC860SAR (855T / 857 / > 862SAR). It supports AAL0, AAL5, CBR and UBR and is integrated into > linux ATM version 0.59 (so you get Q.2931, RFC1577, ILMI etc). I use > a FADS 860 with a SAR-PHY daughter card (STM-1/STS-3c, E1/T1 and > ATM25) as the development platform. > > Unfortunately its not finished yet and has quite a low throughput. I've not > worked on it for about 3 months but hope to do so in the next few weeks. > > Dave. > > Mark Clayton writes: > > > > Is anyone aware of a linux driver for the ADS8260. Or any 8260? > > > > Thanks, > > Mark > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/