From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <015c01c07fa6$17e3fd10$4a1f76d8@washington> From: "Navin Boppuri" To: "Daris Nevil" Cc: References: <011801c07f12$bf037e70$4a1f76d8@washington> <3A639801.AFF3DF00@snmc.com> Subject: Re: Serial driver help Date: Tue, 16 Jan 2001 10:21:30 -0000 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hello Daris, Thank you for the link. But all I see there is docs on how to talk to serial ports. I need some linux data structures info. How is serial.c organized? How can I port a new uart to serial.c ? etc. etc. Do you know of some place I can find this? Thank you, Navin Boppuri ----- Original Message ----- From: "Daris Nevil" To: "Navin Boppuri" Cc: Sent: Tuesday, January 16, 2001 12:38 AM Subject: Re: Serial driver help > Navin, > > Check out http://www.qslinux.org/docs/snmc/serial/index.html, as it may have > the info that you need. > > Regards, > Daris Nevil > SNMC > > Navin Boppuri wrote: > > > Hello, > > > > Can someone tell me where I can find some documentation on how to write a > > serial driver in linux using the serial.h and tty data structures? I am > > using MAX3100 uart connected to the SPI controller. The SPI driver is fine > > works just fine. I do see that uart.c is written for uarts connected on SMC > > and SCC. All I need to do is to port it for SPI. > > > > Thank you, > > Navin Boppuri > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/