* Internal assembler error for instruction icbt
@ 2009-01-15 15:05 wael showair
2009-01-15 16:08 ` Kumar Gala
2009-02-02 13:09 ` martin1234
0 siblings, 2 replies; 3+ messages in thread
From: wael showair @ 2009-01-15 15:05 UTC (permalink / raw)
To: linuxppc-dev
hi All,
i have LTIB version 6.2.2 with which i have built linux kernel 2.6.19-rc5
for my board where its processor is MPC8555.i built the kernel Image
successfuly without any problems
But Now i want to upgrade the linux kernel to 2.6.27 but unfortunately i got
the following error:
************************************************************************
Using /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27 as source for kernel
GEN /home/test/ltib-6.2.2-sv/rpm/BUILD/kbuild/mpc8555amc/Makefile
CHK include/linux/version.h
CHK include/linux/utsrelease.h
CALL
/home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/scripts/checksyscalls.sh
CHK include/linux/compile.h
CALL
/home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/arch/powerpc/kernel/systbl_chk.sh
CC arch/powerpc/kernel/prom_init.o
CALL
/home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/arch/powerpc/kernel/prom_init_check.sh
BOOTCC arch/powerpc/boot/4xx.o
Assembler messages:
Error: Internal assembler error for instruction icbt
Internal error, aborting at
/usr/src/RPM/BUILD/crosstool/source/binutils-2.15/gas/config/tc-ppc.c line
1300 in ppc_setup_opcodes
Please report this bug.
make[2]: *** [arch/powerpc/boot/4xx.o] Error 2
make[1]: *** [zImage] Error 2
make: *** [sub-make] Error 2
error: Bad exit status from /home/test/ltib-6.2.2-sv/tmp/rpm-tmp.81042
(%build)
RPM build errors:
Bad exit status from /home/test/ltib-6.2.2-sv/tmp/rpm-tmp.81042 (%build)
Failed building kernel-2.6.27-mpc8555amc
************************************************************************
i think that i have to upgrade the cross toolchain that i m using, actually
it is version 3.4.3?
is there a certain version of toolchain that i have to use to build linux
kernel 2.6.27?
My last question is how can i upgrade the toolchain i m using?
thanks in advance for ur help
--
View this message in context: http://www.nabble.com/Internal-assembler-error-for-instruction-icbt-tp21479519p21479519.html
Sent from the linuxppc-dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Internal assembler error for instruction icbt
2009-01-15 15:05 Internal assembler error for instruction icbt wael showair
@ 2009-01-15 16:08 ` Kumar Gala
2009-02-02 13:09 ` martin1234
1 sibling, 0 replies; 3+ messages in thread
From: Kumar Gala @ 2009-01-15 16:08 UTC (permalink / raw)
To: wael showair; +Cc: linuxppc-dev
On Jan 15, 2009, at 9:05 AM, wael showair wrote:
>
> hi All,
> i have LTIB version 6.2.2 with which i have built linux kernel
> 2.6.19-rc5
> for my board where its processor is MPC8555.i built the kernel Image
> successfuly without any problems
> But Now i want to upgrade the linux kernel to 2.6.27 but
> unfortunately i got
> the following error:
>
>
> ************************************************************************
> Using /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27 as source for
> kernel
> GEN /home/test/ltib-6.2.2-sv/rpm/BUILD/kbuild/mpc8555amc/Makefile
> CHK include/linux/version.h
> CHK include/linux/utsrelease.h
> CALL
> /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/scripts/
> checksyscalls.sh
> CHK include/linux/compile.h
> CALL
> /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/arch/powerpc/kernel/
> systbl_chk.sh
> CC arch/powerpc/kernel/prom_init.o
> CALL
> /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/arch/powerpc/kernel/
> prom_init_check.sh
> BOOTCC arch/powerpc/boot/4xx.o
> Assembler messages:
> Error: Internal assembler error for instruction icbt
> Internal error, aborting at
> /usr/src/RPM/BUILD/crosstool/source/binutils-2.15/gas/config/tc-
> ppc.c line
> 1300 in ppc_setup_opcodes
> Please report this bug.
> make[2]: *** [arch/powerpc/boot/4xx.o] Error 2
> make[1]: *** [zImage] Error 2
> make: *** [sub-make] Error 2
> error: Bad exit status from /home/test/ltib-6.2.2-sv/tmp/rpm-tmp.81042
> (%build)
>
>
> RPM build errors:
> Bad exit status from /home/test/ltib-6.2.2-sv/tmp/rpm-tmp.81042
> (%build)
> Failed building kernel-2.6.27-mpc8555amc
> ************************************************************************
>
> i think that i have to upgrade the cross toolchain that i m using,
> actually
> it is version 3.4.3?
> is there a certain version of toolchain that i have to use to build
> linux
> kernel 2.6.27?
>
> My last question is how can i upgrade the toolchain i m using?
Newer ltib versions have newer toolchains (like gcc 4.2.x)
- k
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Internal assembler error for instruction icbt
2009-01-15 15:05 Internal assembler error for instruction icbt wael showair
2009-01-15 16:08 ` Kumar Gala
@ 2009-02-02 13:09 ` martin1234
1 sibling, 0 replies; 3+ messages in thread
From: martin1234 @ 2009-02-02 13:09 UTC (permalink / raw)
To: linuxppc-dev
wael showair wrote:
>
> hi All,
> i have LTIB version 6.2.2 with which i have built linux kernel 2.6.19-rc5
> for my board where its processor is MPC8555.i built the kernel Image
> successfuly without any problems
> But Now i want to upgrade the linux kernel to 2.6.27 but unfortunately i
> got the following error:
>
>
> ************************************************************************
> Using /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27 as source for
> kernel
> GEN /home/test/ltib-6.2.2-sv/rpm/BUILD/kbuild/mpc8555amc/Makefile
> CHK include/linux/version.h
> CHK include/linux/utsrelease.h
> CALL
> /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/scripts/checksyscalls.sh
> CHK include/linux/compile.h
> CALL
> /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/arch/powerpc/kernel/systbl_chk.sh
> CC arch/powerpc/kernel/prom_init.o
> CALL
> /home/test/ltib-6.2.2-sv/rpm/BUILD/linux-2.6.27/arch/powerpc/kernel/prom_init_check.sh
> BOOTCC arch/powerpc/boot/4xx.o
> Assembler messages:
> Error: Internal assembler error for instruction icbt
> Internal error, aborting at
> /usr/src/RPM/BUILD/crosstool/source/binutils-2.15/gas/config/tc-ppc.c line
> 1300 in ppc_setup_opcodes
> Please report this bug.
> make[2]: *** [arch/powerpc/boot/4xx.o] Error 2
> make[1]: *** [zImage] Error 2
> make: *** [sub-make] Error 2
> error: Bad exit status from /home/test/ltib-6.2.2-sv/tmp/rpm-tmp.81042
> (%build)
>
>
> RPM build errors:
> Bad exit status from /home/test/ltib-6.2.2-sv/tmp/rpm-tmp.81042
> (%build)
> Failed building kernel-2.6.27-mpc8555amc
> ************************************************************************
>
> i think that i have to upgrade the cross toolchain that i m using,
> actually it is version 3.4.3?
> is there a certain version of toolchain that i have to use to build linux
> kernel 2.6.27?
>
> My last question is how can i upgrade the toolchain i m using?
>
> thanks in advance for ur help
>
HI there
Did you ever find out how to update the toolchain that you are using
I'm trying to crosscompile for the powerpc and get the same error, I also
need to update to an newer toolchain,
I'm currently using Suse11.1. Any advise will be wellcome, thanks...
--
View this message in context: http://www.nabble.com/Internal-assembler-error-for-instruction-icbt-tp21479519p21789373.html
Sent from the linuxppc-dev mailing list archive at Nabble.com.
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2009-02-02 13:09 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-01-15 15:05 Internal assembler error for instruction icbt wael showair
2009-01-15 16:08 ` Kumar Gala
2009-02-02 13:09 ` martin1234
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).