Re: [PATCH v2 0/2] PCI/AER: Report fatal errors of RCiEP and EP if link recoverd

[Shuai Xue <xueshuai@linux.alibaba.com>]

Hi, all,

Gentle ping.
  
Best Regards,
Shuai

在 2024/12/24 19:03, Shuai Xue 写道:
> 
> 
> 在 2024/11/12 21:54, Shuai Xue 写道:
>> changes since v1:
>> - rewrite commit log per Bjorn
>> - refactor aer_get_device_error_info to reduce duplication per Keith
>> - fix to avoid reporting fatal errors twice for root and downstream ports per Keith
>>
>> The AER driver has historically avoided reading the configuration space of an
>> endpoint or RCiEP that reported a fatal error, considering the link to that
>> device unreliable. Consequently, when a fatal error occurs, the AER and DPC
>> drivers do not report specific error types, resulting in logs like:
>>
>>    pcieport 0000:30:03.0: EDR: EDR event received
>>    pcieport 0000:30:03.0: DPC: containment event, status:0x0005 source:0x3400
>>    pcieport 0000:30:03.0: DPC: ERR_FATAL detected
>>    pcieport 0000:30:03.0: AER: broadcast error_detected message
>>    nvme nvme0: frozen state error detected, reset controller
>>    nvme 0000:34:00.0: ready 0ms after DPC
>>    pcieport 0000:30:03.0: AER: broadcast slot_reset message
>>
>> AER status registers are sticky and Write-1-to-clear. If the link recovered
>> after hot reset, we can still safely access AER status of the error device.
>> In such case, report fatal errors which helps to figure out the error root
>> case.
>>
>> - Patch 1/2 identifies the error device by SOURCE ID register
>> - Patch 2/3 reports the AER status if link recoverd.
>>
>> After this patch set, the logs like:
>>
>>    pcieport 0000:30:03.0: EDR: EDR event received
>>    pcieport 0000:30:03.0: DPC: containment event, status:0x0005 source:0x3400
>>    pcieport 0000:30:03.0: DPC: ERR_FATAL detected
>>    pcieport 0000:30:03.0: AER: broadcast error_detected message
>>    nvme nvme0: frozen state error detected, reset controller
>>    pcieport 0000:30:03.0: waiting 100 ms for downstream link, after activation
>>    nvme 0000:34:00.0: ready 0ms after DPC
>>    nvme 0000:34:00.0: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Data Link Layer, (Receiver ID)
>>    nvme 0000:34:00.0:   device [144d:a804] error status/mask=00000010/00504000
>>    nvme 0000:34:00.0:    [ 4] DLP                    (First)
>>    pcieport 0000:30:03.0: AER: broadcast slot_reset message
>>
>> Shuai Xue (2):
>>    PCI/DPC: Run recovery on device that detected the error
>>    PCI/AER: Report fatal errors of RCiEP and EP if link recoverd
>>
>>   drivers/pci/pci.h      |  5 +++--
>>   drivers/pci/pcie/aer.c | 11 +++++++----
>>   drivers/pci/pcie/dpc.c | 32 +++++++++++++++++++++++++-------
>>   drivers/pci/pcie/edr.c | 35 ++++++++++++++++++-----------------
>>   drivers/pci/pcie/err.c |  9 +++++++++
>>   5 files changed, 62 insertions(+), 30 deletions(-)
>>
> 
> Hi, all,
> 
> Gentle ping.
> 
> Best Regards,
> Shuai