PCMCIA - another step...

PCMCIA - another step...

[Paolo Scaffardi]

I removed that outp_b instruction and i made another step to the goal. I
insert a Genius ME3000II SE card, fully supported by pcmcia on other x86
linux boxes, and the system hangs:

Starting PCMCIA services: modulesLinux PCMCIA Card Services 3.1.10
  kernel build: 2.2.14 #749 ven ott 13 10:46:33 CEST 2000
  options:  none
m8xx_pcmcia: Version 0.03, 14-Feb-2000, Magnus Damm
m8xx_pcmcia: FADS using SLOT_B with IRQ 13.
 cardmgr.
sh-2.03# cardmgr[26]: starting, version is 3.1.10
cardmgr[26]: watching 1 sockets
cardmgr[26]: initializing socket 0
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
cardmgr[26]: socket 0: Melco LPC2-T Ethernet
cardmgr[26]: executing: 'insmod /lib/modules/2.2.14/net/8390.o'
cardmgr[26]: executing: 'insmod /lib/modules/2.2.14/pcmcia/pcnet_cs.o'
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e0000000 (1000)
Remapping e4000000 (1000)
Kernel panic: Kernel Mode Software FPU Emulation
Rebooting in 180 seconds..

What should i do now?

- may the pinguin b with u -

Have a nice day,
Paolo Scaffardi.
AIRVENT SAM s.p.a. - RIMINI - ITALY


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Re: PCMCIA - another step...

[Matthew Locke]

Paolo Scaffardi wrote:

I have some patches for the kernel and pcmcia-cs for the 8xx on our ftp
site.

ftp://ftp.mvista.com/pub/area51/ppc_8xx

I moved Magnus stuff up to pcmcia-cs-3.1.19 and there is a patch for the
ioremapping of _IO_BASE.  I chose 0x80000000 but that probably is not
the best place to put it.

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

RE: PCMCIA - another step...

[Govindan]

Hi Paolo Scaffardi,

I am unable to get these patches. I have the HardHat 1.2 CD-ROM
and would like to use this patch for a CLLF board with an IBM micro drive.
Could you provide the mechanism to access this location?
Thank you in advance,

Govindan.

"Code it clear rather than clever"
---------------------------------------------------------------------
Govindan  K Thrithala                 Tel: +91-80-226-7495x4033
Tejas Networks India Pvt. Ltd.     Fax: +91-80-226 7494
49, Khanija Bhavan, Race Course Road
Bangalore 560 001
-------------------------------------------------------------------
"I care for future, because I spend rest of my life there"





-----Original Message-----
From: owner-linuxppc-embedded@lists.linuxppc.org
[mailto:owner-linuxppc-embedded@lists.linuxppc.org]On Behalf Of Matthew
Locke
Sent: Friday, October 13, 2000 10:23 PM
To: Paolo Scaffardi
Cc: linuxppc-emb
Subject: Re: PCMCIA - another step...



Paolo Scaffardi wrote:

I have some patches for the kernel and pcmcia-cs for the 8xx on our ftp
site.

ftp://ftp.mvista.com/pub/area51/ppc_8xx

I moved Magnus stuff up to pcmcia-cs-3.1.19 and there is a patch for the
ioremapping of _IO_BASE.  I chose 0x80000000 but that probably is not
the best place to put it.


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/